background image

English

Information / BEE Regulation

15

Information on hazardous constituents as specified in sub-rule1 of rule16 (1) in electrical and electronic 
equipment.
Declaration of Conformity with the requirements of the E-Waste (Management) Amendment Rules 2018 
with the rule 16 (1) limits with respect to Lead, Mercury, Cadmium, Hexavalent chromium, Polybrominated 
biphenyls, Polybrominated diphenyl ethers.

The content of hazardous substance with the exemption of the applications listed in SCHEDULE II of the 
E-Waste (Management) Amendment Rules 2018 :
1. Lead (Pb) – not over 0.1% by weight;
2. Cadmium (Cd) – not over 0.01% by weight;
3. Mercury (Hg) – not over 0.1% by weight;
4. Hexavalent chromium (Cr6+) – not over 0.1% by weight;
5. Polybrominated biphenyls (PBBs) – not over 0.1% by weight;
6. Polybrominated diphenyl ethers (PBDEs) – not over 0.1% by weight.

For the purpose of recycling to facilitate effective utilization of resources, 
please return this product to a nearby authorized collection center, 
registered dismantler of recycler, or Panasonic service center when 
disposing of this product.

Customer care number ( Toll free ) :   1800 103 1333 ,1800 108 1333

Please see the Panasonic website for further information on collection centers, etc.
or call the customer care toll-free number
http://www.panasonic.com/in/corporate/sustainability/panasonic-india-i-recycle-program.html

S.No.

1.

All electrical and electronic products are required 
to be handed over only to the Authorized 
recycler.

2.

The product should be handed over only to 
authorized recycler for disposal.

3.

4.

5.

6.

Keep the product in isolated area, after it 
becomes non-functional / un-repairable so as to 
prevent its accidental breakage. 

Provide information on the catalogue with 
product end-of-life.
Always dispose products that have reached 
end-of life at Panasonic India Authorized Service 
Centre.

Wherever possible or as instructed, separate the 
packaging material according to responsible 
waste disposal options and sorting for recycling.

The product is not meant for re-sale to any 
unauthorized agencies / scrap dealer / kabari-
walas.

The product is not meant for mixing into house-
hold waste stream.

Do not keep any replaced spare part(s) from the 
product in exposed   area.

Do not donate old electronic items to any body. 
Do not dispose your product in garbage bins 
along with municipal waste that ultimately 
reaches landfill.
Do not give e-waste to informal and unorganized 
sectors like Local Scrap Dealer / Rag Pickers.

The product should not be opened by the User 
himself / herself, but only by authorized service 
personnel.

Do's

Don't

Do’s & Don’t: E-waste (Management ) Amendment Rules 2018

ACXF55-1918̲OL.ai   15   6/1/2018   1:12:46 PM

ACXF55-1918̲OL.ai   15   6/1/2018   1:12:46 PM

Содержание CS-LU12UKYRN Series

















Отзывы: