Panasonic CS-E7PKEW Скачать руководство пользователя страница 87

Страница: 87 / 208

13.11 nanoe-G Operation

•

This operation provides clean air by producing great amount of negative ions and distribute through the

discharge airflow to capture or deactivate molds, bacteria or viruses.

•

nanoe-G operation start condition

During unit running at any operation mode, if nanoe-G operation is activated, combination operation

(operation mode + nanoe-G operation) starts.

During unit is OFF, if nanoe-G operation is activated, nanoe-G individual operation starts.

•

nanoe-G operation stop condition

When OFF/ON button is pressed to stop the operation.

When nanoe-G button is pressed.

When OFF Timer activates.

•

nanoe-G operation pause condition

When indoor fan stop (during deice, odor cut control, thermostat off, etc.). nanoe-G operation resume after

indoor fan restarts.

When indoor intake temperature

≥

40°C. nanoe-G operation resume after indoor intake temperature

≤

40°C

continuously for 30 minutes.

•

Indoor

fan

control

During any operation mode combines with nanoe-G operation, fan speed follows respective operation mode.

However, nanoe-G system enabled when fan speed

≥

500rpm to ensure proper negative ion distribution,

nanoe-G system disabled when fan speed < 500 rpm.

During nanoe-G individual operation, only Auto Fan Speed and no Powerful operation is allowed. Even if Fan

Speed button is pressed, no signal is sent to the unit and no change on remote control display. Auto Fan
Speed for nanoe-G operation changes from SHi to Hi after 4 hours of operation.

•

Airflow direction control

During any operation mode combines with nanoe-G operation, airflow direction follows respective operation

mode.

During nanoe-G individual operation, only Auto Air Swing is allowed. Even if Air Swing button is pressed, no

signal is sent to the unit and no change on remote control display.

•

Timer

control

When ON Timer activates when unit stops, previous operation resumes and restored last saved nanoe-G

operation status.

When ON Timer activates during any operation, no change on current operation.

When OFF Timer activates during any operation, all operation stops and the latest nanoe-G operation status

is saved.

•

Indicator

When nanoe-G starts, nanoe-G indicator ON.

•

Remote Control Receiving Sound

Normal

Operation

nanoe-G Operation

: Beep

Nanoe-G

Operation

Normal Operation

: Beep

Stop

nanoe-G individual Operation : Beep

Nanoe-G individual Operation

Stop

: Long Beep

•

Power

failure

During nanoe-G individual operation, if power failure occurs, after power resumes, nanoe-G individual

operation resumes immediately.

During combination operation, if power failure occurs, after power resumes, combination operation resume

immediately.

Содержание CS-E7PKEW

















































































































































































































Результаты поиска

Содержание CS-E7PKEW

Отзывы:

Бренды по названию

Популярные бренды

Panasonic CS-E7PKEW, Руководство по обслуживанию

Результаты поиска

Содержание CS-E7PKEW

Отзывы:

Бренды по названию

Популярные бренды