Panasonic CS-E7PKEW Скачать руководство пользователя страница 85

Страница: 85 / 208

•

Control

contents

Fan speed is changed from normal setting to quiet setting of respective fan speed.

Fan speed for quiet operation is reduced from setting fan speed.

13.6 Quiet operation (Heating)

•

Purpose

To provide quiet heating operation compare to normal operation.

•

Control

condition

Quiet operation start condition

When “POWERFUL/QUIET” button at remote control is pressed.

POWERFUL/QUIET LED illuminates.

Quiet operation stop condition

When one of the following conditions is satisfied, quiet operation stops:

•

POWERFUL/QUIET button is pressed again.

•

Stop by OFF/ON switch.

•

Timer “off” activates.

•

AUTO COMFORT button is pressed.

•

ECONAVI button is pressed.

•

Mild Dry Cooling button is pressed.

When quiet operation is stopped, operation is shifted to normal operation with previous setting.

When fan speed is changed, quiet operation is shifted to quiet operation of the new fan speed.

When operation mode is changed, quiet operation is shifted to quiet operation of the new mode, except

fan mode only.

During quiet operation, if timer “on” activates, quiet operation maintains.

After off, when on back, quiet operation is not memorised.

•

Control

contents

Fan speed manual

Fan speed is changed from normal setting to quiet setting of respective fan speed.

Fan speed for quiet operation is reduced from setting fan speed.

Fan Speed Auto

Indoor FM RPM depends on pipe temp sensor of indoor heat exchanger.

13.7 Powerful Mode Operation

•

When the powerful mode is selected, the internal setting temperature will shift lower up to 2°C (for Cooling/Soft

Dry) or higher up to 3.5°C (for Heating) than remote control setting temperature for 20 minutes to achieve the
setting temperature quickly.

Содержание CS-E7PKEW

















































































































































































































Результаты поиска

Содержание CS-E7PKEW

Отзывы:

Бренды по названию

Популярные бренды

Panasonic CS-E7PKEW, Руководство по обслуживанию

Результаты поиска

Содержание CS-E7PKEW

Отзывы:

Бренды по названию

Популярные бренды