background image

6

TO TURN ON OR OFF THE UNIT

•  Please be aware of the OFF indication on the remote 

control display to prevent the unit from starting/

stopping improperly.

TO SET TEMPERATURE

•  Selection range: 16°C ~ 30°C.
•  Operating the unit within the recommended 

temperature could induce energy saving.

HEAT mode : 20°C ~ 24°C.

COOL mode : 26°C ~ 28°C.

DRY mode : 1°C ~ 2°C lower than room temperature.

TO SELECT OPERATION MODE

AUTO mode - For your convenience

•  During operation mode selection the power indicator 

blinks.

•  Unit selects operation mode every 30 minutes 

according to temperature setting, outdoor and room 

temperature (For single Split System).

•  Unit selects operation mode every 3 hours according 

to temperature setting, outdoor and room temperature 

(For Multi split system).

HEAT mode - To enjoy warm air

•  Unit takes a while to warm up. The power indicator 

blinks during this operation.

COOL mode - To enjoy cool air
DRY mode - To dehumidify the environment

•  Unit operates at low fan speed to give a gentle cooling 

operation.

TO SELECT FAN SPEED

(5 OPTIONS) 

•  For AUTO, the indoor fan speed is automatically 

adjusted according to the operation mode.

TO ADJUST VERTICAL AIRFLOW 

DIRECTION (5 OPTIONS)

•  Keeps the room ventilated.

•  If AUTO is set, the louvers swing up/down 

automatically.

•  In heat mode, the air blows horizontally for a while, 

then starts to blow downwards.

  PRODUCT OVERVIEW & OPERATIONS

  PRODUCT OVERVIEW & OPERATIONS

TO ENJOY CLEAN & 

FRESH AIR

•  Generates negative ions to produce fresh air effect 

and attract dust which will then be captured at the 

positively charged e-ion 

fi

 lters.

TO MONITOR AIR 

QUALITY

•  Patrol sensor detects air quality.

•  When the air quality is unsatisfactory, e-ion operation 

will start automatically.

TO IMPROVE HUMIDITY 

AND MOISTURE LEVEL 

(For single Split System)

•  This operation reduces air dryness and provides you 

with a comfortable living environment.

•  When vertical air

fl

 ow direction is set to AUTO, it stops 

at lower position to avoid cold air contact. However, 

you can adjust the louver direction manually.

TO ENJOY QUIET 

ENVIRONMENT

•  This operation reduces air

fl

 ow noise.

TO ACHIEVE 

TEMPERATURE QUICKLY

• 

 and 

 can be activated 

in all modes and can be cancelled by pressing the 

respective button again.

• 

 only can be activated in COOL mode and can 

be cancelled by pressing the button again.

• 

 and 

 or 

 and 

 can 

not be selected at the same time.

• 

 and 

 can be activated even when the 

unit is turned off. In this condition, fan speed and air 

swing can not be adjusted.

Содержание CS-E18JKEW











Отзывы: