Panasonic CS-C7MKP-7, Руководство по обслуживанию

Страница: 61 / 99

61
12.15.10 Infrared Sensor Abnormality
š
Abnormality detection:
o
Connector disconnection / Wire cut abnormality
ƒ
Sensor judge Hi level continuously for 25 seconds
o
Circuit abnormality
ƒ
70 seconds after power ON, if infrared sensor judge Lo level continuously for 25 seconds
š
Error Code judgment
o
When abnormality happened, internal counter increase by 1 time.
o
Infrared sensor power OFF, retry after 5 seconds.
o
When the infrared sensor maintains normal condition for 120 seconds, the counter reset or AC reset.
o
When abnormality counter reached 4 times, No TIMER indicator blinking.
š
When error code happened, the unit is able to operate without AUTO COMF / ECO NAVI.
12.15.11 Infrared Sensor Check Mode
š
To enable Infrared sensor abnormality check mode:
š
During ECO NAVI / AUTO COMF is ON, when CHECK signal received, if either sensors has abnormality, the 4
times abnormality counter is ignored, ECO NAVI Indicator will blink immediately and error code is memorized.
š
The unit could operate without ECO NAVI or AUTO COMF.
š
The ECO NAVI indicator blinking could be cancelled by pressing ECO NAVI/AUTO COMF button again.
š
If the Infrared sensor has no abnormality, the CHECK process will end and continue with normal operation.