CQ-RDP153N
MONO OFF/LOCAL OFF
MONO ON/LOCAL OFF
MONO ON/LOCAL ON
MONO OFF/LOCAL ON
How to Enjoy Music
Power on
Enjoy music in each mode
Press to select a band.
FM1
FM2
FM3
AM (LW/MW)
Mono/Local Selection
Mono:
Reduce noise if weak signals are received
Local:
Only strong signals of stations are searched
for in seek tuning.
Display Change
Program Service Name
Frequency
Clock Time
(3 seconds)
Note:
A station name appears when it is an RDS
station.
Remote Control Sensor
PTY(Programme Type)/
MONO/LOC(Local)
AF(Alternative Frequency)/
REG(Region)
DISP(Display)/CT(Clock Time)
SRC(Source)/
POWER
MUTE/LOUD(Loudness)
CD Slot
Eject
{
DISC
}
Note:
When first powered up, a demonstration message
appears. Press
[DISP]
to stop the demonstration message.
<
TUNE
>
6
TRACK
7
Fast Forward/Fast Reverse
■
FM broadcast
Hold down
[PTY](MONO/LOCAL)
for 2 seconds or more to
change the mode.
■
AM(LW/MW) broadcast
Press
[PTY](MONO/LOCAL)
to change the mode.
Turn to change each level
Turn to adjust
■
Sound Control
■
Volume Adjustment
(Setting range: 0 to 40)
■
Mute
■
Loudness
Sound Controls
●
Next track:
[
7
]
Press
●
Start of current track:
[
6
]
Press once
●
Previous track:
[
6
]
Press twice
●
Fast forward:
[
7
]
Hold down
●
Fast reverse:
[
6
]
Hold down
●
Previous disc :
[
{
]
Press
●
Next disc :
[
}
]
Press
Disc indicator
Make sure that the disc indicator is off before loading a disc.
If the disc indicator lights, eject the disc, then load a new disc.
Only discs with the label at
right are available.
Note:
Not compatible with CD-RW (except when CX-DP880N is connected).
Trouble may occur while playing CD-Rs/CD-RWs. Refer to the section on “Notes
on discs (CD-R, CD-RW)” (Attached sheet
☞
e
)
(–12 to +12 in 2 dB step)
(–12 to +12 in 2 dB step)
(left/right: 1 to 15)
(front/rear: 1 to 15)
(0 to 40)
Bass
Treble
Balance
Note:
If no operation takes place for 5 seconds or more (2 seconds in the
volume mode), the display return to the regular mode.
Fader
1
CQ-RDP153N
PTY (MONO/LOC)
DISP
Press to select a mode
Press to switch on and off.
●
Mute the sound completely.
Hold down for 2 seconds or more
to switch on and off.
●
Enhance bass and treble tones at low
volume.
Volume
Radio
CD Changer
CD Player
TA(Traffic Announcement)
VOLUME/SEL(Select)
2
■
Seek tuning
Hold down for 0.5 seconds or more.
Tuning will automatically stop when the next station is found.
[>]
: higher frequency
[<]
: lower frequency
■
Manual Tuning
[>]
: higher frequency
[<]
: lower frequency
LOCAL OFF
LOCAL ON
■
Disc Eject
■
Pause
Radio
CD
Player
CD
Changer
For
CQ-RDP153
CQ-RDP143
CQ-RDP133N
Display Change
Track Number/Playing Time
Clock Time
■
CD player mode
■
CD changer mode
Clock Time
(Hold down for 2 seconds
or more)
Disc Number/Track Number
Playing Time
When a disc is loaded.
●
Press to select a mode as follows.
●
When a disc is not loaded
Insert a disc and playback starts automatically.
(Attached sheet
☞
!0
)
■
Track selection and track search
●
When magazine is not loaded
Insert a magazine with discs and playback starts automatically.
■
Disc selection
■
Track selection and track search
(Refer to the CD player mode.)
●
Press to power on.
●
Press again and hold to power off.
Changer indicator
Lights when a changer with magazine is connected.
REPEAT
RANDOM
SCAN
REP
1st track on each disc
(changer only):
Hold down
[5]
for 2 seconds or more.
All tracks:
Press
[5].
R
5
DISC
●
10 seconds play of each track.
●
Random play
●
Press again to cancel in each play mode.
Press
LOUD
(Press)
CD-RW
CD-RW
CD-RW
WMA
WMA
WMA
●
Available Discs
●
Non-available
MP3
MP3
MP3
8 cm
8 cm
8 cm
1 to 6 (Preset Memory)
BAND/APM(Auto Preset Memory)/
y
/
5
(Pause)
When a changer is connected.
(For CQ-RDP153/RDP143/RDP133N)
Release it to resume regular CD play.
Press
[
u
]
to stop CD play and eject the disc.
Press
[BAND] (
h
/
5
)
to pause. Press again to resume to playback.
Press
All tracks:
Press
[4].
lights.
All tracks on the current disc
(changer only):
Hold down
[4]
for 2 seconds
or more. blinks.
R
5
R
5
●
Repeat play
Current track:
Press
[6].
lights.
Current disc
(changer only):
Hold down
[6]
for 2 seconds
or more. blinks.
REP
REP
Convenient Function
Radio Data System (RDS)
RDS is a system performing convenient functions for FM stations in
such as Europe. However, there may be some areas where RDS is
not effective for reception.
8
Station name appears instead of the frequency.
8
The clock is automatically adjusted.
AF
Alternative frequency
8
When reception is poor, an RDS station broadcasting the same pro-
gram is tuned in automatically.
3
To select AF receiving sensitivity
a
Press
[AF]
(Attached sheet
☞
r
)
AF1
: For mountain areas and places enclosed by high-rise
buildings or other objects that prevent radio reception.
(Default)
AF2
: For suburbs and other places free of obstructions of view.
OFF
: For the AF function inactivated.
3
To change AF range
a
Hold down
[AF]
for 2 seconds
or more
8
REGION ON : To select a station broadcasting the same program
8
REGION OFF : To select an AF station of the same network
(The program may be different) (Default)
3
AF1 or AF2 auto preset memory
8
The memory is valid for the RDS stations only.
8
A station of the same network in good receiving condition is
received.
8
If a preset station is in poor receiving condition, another station in
good receiving condition can be tuned in to by pressing the same
preset button. (Best Station Research)
8
PI Seek (Attached sheet
☞
t
)
TA
Traffic Announcements
8
To automatically listen to a station that gives
traffic information periodically.
3
To select TA mode
a
Press
[TA]
(Attached sheet
☞
y
)
(Default : TA OFF)
8
To cancel
a
Press
[TA]
again.
Notes:
8
If a selected station is in poor receiving condition, another station
giving traffic announcements will be automatically tuned in.
8
When TA ON is selected, only TP station will be searched. When TA
ON is selected, only TP station will be memorized automatically.
8
Even in CD player and CD changer modes, a station giving the traf-
fic information is automatically received.
3
To listen to TA only
a
Hold down
[TA]
for 2 seconds
or more (in FM mode)
8
To cancel
a
Press
[TA]
again.
(Or, raise the volume with
[VOL]
).
3
TA Volume Set
(Attached sheet
☞
u
)
PTY
Program Type
8
Stations can be selected by program type,
for example, news and rock.
3
To select mode PTY
a
Press
[PTY]
(Attached sheet
☞
i
)
8
To cancel
a
Press
[PTY]
again.
3
PTY preset call
a
Press
[1]
to
[6]
8
The following program types are preset. (Attached sheet
☞
o
)
q
News
w
Speech
e
Sport
r
Pop music
t
Classics
y
Music
3
PTY selection
q
Press
[
]
TUNE
[
]
to select a program type below.
w
Press
[BAND]
for automatic selection.
3
PTY preset change
q
Select a program type by using PTY selection or PTY pre-
set call.
w
Hold down
[1]
to
[6]
for 2 seconds or more.
Note:
When there is no corresponding program type, “NO PTY” is
displayed.
3
Emergency Announcement
8
An emergency announcement, if broadcast, is automatically
received.
8
This function operates in other than the radio mode, and “ALARM” flashes
.
Note:
Press
[DISP]
to switch the PTY display language to Swedish.
EON
Enhanced Other Networks
8
Traffic information of the other networks is received.
8
Preset AF data is refreshed at all times.
FM broadcast
AM(LW/MW)
broadcast
(Changer)
(CD)
Note:
Remote control unit is an option (CA-RC61EX). For details, refer to the manual of the remote
control unit.
SPEECH
INFO
CULTURES
ROCK M
OTHER M
SOCIAL A
LEISURE
OLDIES
AFFAIRS
DRAMA
POP M
CLASSICS
CHILDREN
TRAVEL
NATIONAL
NEWS
EDUCATE
VARIED
LIGHT M
FINANCE
PHONE IN
COUNTRY
DOCUMENT
MUSIC
SPORT
SCIENCE
M_O_R_ M
WEATHER
RELIGION
JAZZ
FOLK M
Preset Memory
●
Up to 6 stations can be stored in each of the FM1, FM2, FM3 and AM (LW/MW) band
selections.
Press to select a band for preparation.
■
Auto Preset Memory
Hold down for 2 seconds or more.
●
Automatically tune the 6 stations with good reception and save
under preset buttons
[1]
to
[6]
.
●
Preset stations appear for 5 seconds each.
Notes:
●
Only RDS stations will be saved at default setting (AF is ON).
●
To stop scanning, press one of the preset buttons
[1]
to
[6]
.
■
Manual Preset Memory
Hold down one of the preset buttons
[1]
to
[6]
until the display
blinks once.
Note:
New stations overwrite existing saved stations after following this procedure.
Press
[1]
to
[6]
to call a preset station.
Caution:
Never preset stations while driving.
■
Preset station calling
Use seek or manual tuning to find a station.
This unit does not support CD text display.
Band
Preset Number
Frequency
Downloaded from Caradio-Manual.com Manuals
