CQ-D7400W
39
Speaker settings
3
Setting
4
Finish the
Setting.
Select the
speaker.
Left front speaker output balance
FRONT L
Center speaker output balance
Right surround speaker output balance
R
≥
SUR
Subwoofer speaker output balance
SUB
≥
W
A test signal (continuous tone) is output from each speaker for
approximately two seconds.
Adjust the output balance so that the tone appears to have the
same volume from each speaker.
Adjusting the output balance:
Adjust the volume of all of the other speakers to the volume level
of the speaker from which the test signal appears to the quietest.
≥
If the speaker setting is “NONE” or “NO” for a speaker, the test
signal is not output and that speaker cannot be selected.
(page 36)
≥
Press
[
%
%
%
%
%
]
or
[
$
$
$
$
$
]
to adjust the volume of the test signal.
Right front speaker output balance
FRONT R
Left surround speaker output balance
L
≥
SUR
CENTER
CAR DVD PLAYER / RECEIVER
CAR DVD PLAYER / RECEIVER
DISP(Display)
SEL(Select)
SET
SEL
(Select)
RET
[RETURN]
Note:
Press
[DISP]
on the
main unit or
[RET]
on
the remote control unit
to return to the regular
mode.
Note:
≥
If no operation takes place for
more than 60 seconds in the
settings, the display returns to
the regular mode.
