Panasonic CQ-D7400W, Руководство по эксплуатации

Страница: 10 / 72

10
CQ-D7400W
Meaning of Symbols
CQ-D7400W
16
Preparation:
≥
Turn the car’s ignition switch ACC or ON.
≥
Turn the monitor switch to ON.
≥
Check the monitor connection setting. (page 67)
Common Operations
Power [PWR]
ON: OFF:
Note:
≥
When the power is switched on for the first time, a
demonstration display appears.
To cancel the demonstration display
To display the demonstration again
Display
Change
2 sec.
4 sec.
[when the power is off]
Regular mode
r
Background
Note:
≥
will be
displayed when the
clock is not adjusted.
≥
There are five kinds of
background displays.
It can be selected in
PICTURE mode. (page 50)
When the power is OFF
Clock display Display off
When the power is ON
Regular mode Folder layer (MP3 only)
Display off* Clock (24-hour system) Background
CAR DVD PLAYER / RECEIVER CAR DVD PLAYER / RECEIVER
VOLUME
PWR (Power), SOURCE
MUTE
DISP (Display)
PWR
(Power),
SOURCE
VOL (Volume)
MUTE
* Not only the display area, but also the lighting is turned
off. In addition, when a valid button is pressed while
the lighting is off, the lighting and the display turn on
and then turn off again after approximately 5 seconds.
CQ-D7400W
17
SOURCE VOLUME [VOL
"#
]
Note:
≥
The sound level for each source is stored in the
memory. (There is one volume setting for AM
radio band and one volume setting for FM radio
band.)
Decreasing volume range is adjustable by setting. (page 48)
No sound.
Mute/
Attenuation
Decrease the volume by
j
20 dB.
(When a CD changer
is connected.)
Radio (AM/FM)
(Auxiliary source)
(Ex. FM)
Disc (DVD/Video CD/CD/MP3)
CD changer
(Ex. DVD)
AUX (Auxiliary source)
Default: j 40 dB
Setting range:
j
82 dB to 0 dB
UP DOWN
This manual uses its own form of illustrations and methods
of description to indicate the operating procedures and provide
information.
Indicates pressing a button.
Indicates pressing a button
for an extended period of time.
2 sec.
In each section, the main operations are
described inside this box.
Start reading here if you want to use the
product immediately.
Various functions other than the main
functions in the above-mentioned box
are described here.
Read this area to learn how to get the
most out of the unit.
This can only be controlled
through the main unit.
This can only be controlled
through the remote control
unit.
Operations with neither mark can be
performed either directly on the
main unit or using the remote
control unit.