20
CQ-C8803N
Radio
Band
Frequency
Preset Number
Radio Mode Display
Lights when
LOCAL
is
activated. (
a
page 20)
Lights while receiving an FM stereo signal.
Lights when
MONO
is activated. (
a
page 20)
Radio Menu Display
In the AM mode, only AUDIO FILTER and LOCAL can be
selected.
1
Press
[MENU]
to
display the menu
display.
For using the remote
control, hold down
[SEL](MENU)
for 2
sec. or more.
2
Press
[
}
]
or
[
{
]
to select a mode to be
adjusted.
3
Press
[BAND]
(
SET
)
to adjust.
4
Press
[MENU]
to
confirm the
adjustment.
For using the remote control, hold down
[SEL]
(MENU)
for 2 sec. or more.
MONO (Monaural)
Noise reduction when the signal strength decreases
: Receiving in stereo (default)
: Receiving in mono and reducing the noise level
LOCAL
Setting when searching for a station
: Searching even for a relatively low-intensity
radio wave station (default)
: Searching only for a high-intensity radio wave
station
AUDIO FILTER (IF)
IF filter setting for noise suppression
: Wide range
: Middle range (default)
: Narrow range
PRESET
You can select 6 or 18 stations for FM presetting with the
use of APM.
:
Presets 6 stations to FM1 to FM3 respectively, that is, 18
stations in total at the same time. This function is useful
for presetting more than 6 stations. (default)
:
Presets 6 stations with good reception to the selected
band from FM1 to FM3. This function is useful for preset-
ting stations in different areas in different bands.
D·M SET
(
a
page 21)
DISP
PTY
DISP
PTY
