Panasonic Cordless Phon Скачать руководство пользователя

Страница: 92 / 108

Cause & Remedy

The cordless handset has lost communication
with the base unit. Walk closer to the base unit,
and try again.

The handset battery needs to be charged.
Recharge the battery by placing it on the
charger.

If more than one handset or the base unit and
a handset are in use:
– you may not be able to program certain

function items, such as “Set password” or
“Pager on/off”,

– you may not be able to make an external or

internal call, or

– you may not be able to listen to messages in

your mailbox.

Try again later.

•

The paged party is engaged in a call.

•

While another user is listening to messages in
the general delivery mailbox, you cannot
access that mailbox (p. 73).

•

Both lines are in use or a line of the button
you pressed is in use. You cannot make a
call. Try again later.

•

A paged handset is too far from the base unit.

•

A paged handset has not been registered
(p. 19, 53).

•

The handset you are canceling has not been
registered (for cordless handset only p. 54).

is pressed while the cordless

handset is on the charger. Lift the handset and
try again.

When trying to store an item in the directory,
the directory memory is full. Erase other items
and try again (p. 39).

Error Messages

Display messages

If the unit detects a problem, one of the following messages will be
displayed on the base unit or cordless handset. Error beeps or a busy tone
will sound.

Display message

No link to base.
Walk closer to
base & try again

(cordless handset only)

Recharge

(cordless handset only)

System is busy.
Please try again
later.

Busy

Invalid

Please lift up
and try again

(cordless handset only)

Memory is full

Содержание Cordless Phon













































































































Результаты поиска

Содержание Cordless Phon

Отзывы:

Похожие инструкции для Cordless Phon

Бренды по названию

Популярные бренды

Panasonic Cordless Phon, Руководство по эксплуатации

Результаты поиска

Содержание Cordless Phon

Отзывы:

Похожие инструкции для Cordless Phon

Бренды по названию

Популярные бренды