36
1
Press
(FUNCTION)
.
2
While “
Save directory
” is at the
arrow, press
H
.
•
The display shows the number of
items, and “
Enter name
”.
3
Enter a name, up to 16 characters,
using the dialing buttons (p. 37).
•
To move the cursor, press
I
or
H
.
•
If a name is not required, go to step 4.
4
Press
(ENTER)
.
5
Enter a phone number, up to 22
digits.
•
If you misdial, press
(CLEAR)
. Digits
are erased from the right. To erase all
digits, press and hold
(CLEAR)
.
6
Press
(ENTER)
.
•
A beep sounds.
•
To store other items, repeat from
step 2.
•
To return to the standby mode, press
(EXIT)
.
D i r e c t o r y =
0 i t e m
E n t e r n a m e :
IH
E N T E R = N e x t
E n t e r p h o n e N o . :
E n t e r n a m e :
T o m J o n e s
IH
E N T E R = N e x t
0 9 8 7 6 5 4 3 2 1
E N T E R = S a v e
•
If a pause is required for dialing,
(PAUSE)
can be stored in a phone number in
step 5. This counts as one digit (p. 46).
•
If the display shows “
Memory is full
” in step 2, press
(EXIT)
and erase other
stored items from the directory (p. 39).
Using the Directory
Base Unit Handset
You can store names and phone numbers in both the base unit and
cordless handset directories. The base unit can store up to 100 items.
Each cordless handset can store up to 50 items. All directory items are
sorted by the first word in alphabetical order. Using the directories, you can
make a call by selecting a name on the display.
Storing Names and Numbers in the Directory
Make sure that the base unit/cordless handset is in the standby mode.
T o m J o n e s
0 9 8 7 6 5 4 3 2 1
H
S a v e d i r e c t o r y
D a t e a n d t i m e
R i n g e r s e t t i n g
Base Unit
