background image

44

Ope

ration

Us

eful

 Inform

atio

n

Using CD/DVD

‹

Before using the drive

z

Do not expose the DVD-ROM & CD-R/RW drive to excessive smoke that may leave 
a residue, e.g. oil smoke, or tobacco smoke. Doing so could shorten the life of the 
drive lens.

‹

About opening or closing the disk cover/cleaning the 

drive lens

z

When the computer is on, be sure to use the open lever on the left side of the com-
puter or perform the ejecting operation through Windows.
When using B’s Recorder or B’s CLiP, you cannot open the cover using the open 
lever. Refer to “Chapter 3: Writing to CDs (B’s Recorder/B’s CLiP)” in onscreen Ref-
erence Manual

z

To remove a disk when the disk cover cannot be opened or when the computer is 
powered off, insert a pointed object (e.g., the bent-out tip of a paper clip, or the tip of 
a ballpoint pen) into the emergency hole (A), and move in the direction of the arrow.

z

Be careful not to do any of the following when the disk cover is open:
• Do not close the display.

Be sure to close the display only after confirming the disk cover is closed. If the 
disk cover is open, the LCD may become damaged.

• Never insert foreign objects such as paper clips into the DVD-ROM & CD-R/RW 

drive. 
This could cause it to malfunction.

z

The disk cover can be opened up to an angle of 70 degrees. Do not force the cover 
open any further.
If a hand or other object touches the disk cover and accidentally opens it wider than 
70 degrees, pull it forward slowly until the stopper holds the cover in its proper posi-
tion.

z

Do not leave the disk cover in the open position or touch the lens.
Over time, dust may build up on the lens, or on a disk. This may result in a read or 
write malfunction.

z

Insert the disk securely. If the disk cover is closed without inserting the disk securely, 
it may become damaged.

z

Do not access the drive until after the disk cover is closed and the DVD-ROM & CD-

R/RW drive status indicator 

 is off.

z

We recommend cleaning the drive lens (B) with an air puffer used for camera lenses
(Do not use any spray lens cleaning products.)

‹

While the DVD-ROM & CD-R/RW drive is being 

accessed

z

Do not open the DVD-ROM & CD-R/RW drive or move the computer while the DVD-
ROM & CD-R/RW drive is being accessed.
Doing so could cause the disk to shift position, which may damage the disk, or 
cause the DVD-ROM & CD-R/RW drive to malfunction.
After running an application involving access to a disk, do not open the DVD-ROM & 
CD-R/RW drive until after the application has been closed.

z

Do not apply excessive force on the disk cover.

z

Do not operate the open lever.

z

Do not shock the computer by removing or inserting cables and cards, etc. This may 
result in a read or write malfunction.

‹

About recognition of media

z

It may take about 30 - 40 seconds for an image recorded to a rewritable media to be 
played back.

Содержание CF-W2 Series XP













































































Отзывы: