Panasonic CF-W2 Series XP Скачать руководство пользователя

Страница: 16 / 76

repa

rat

ions

Gett

ing Sta

rte

Confirm the Status Using the LEDs

Indicators

Indicator Name/Status

Power indicator

Not lit: Power off / Hibernation mode

Green: Power on

Blinking green: Standby mode

Battery pack indicator

Not lit: Battery pack is not connected or no charging.

Orange: Charging in progress.

Green: Fully charged.

Red: The battery level is very low (the charge is approx. 9% or less).

Blinking red: Battery pack or charging circuit may not be working properly.

Blinking orange: Battery cannot be recharged temporarily (The internal temperature of the battery
pack is outside the acceptable temperature range for recharging.)

Caps Lock indicator

This indicator lights green when the

Caps Lock

key is pressed: Subsequent non-shifted input is

capitalized.

NumLk indicator (Ten-key mode)

This indicator lights green when the

NumLk

key is pressed: Part of the keyboard (see figure below)

will function as a ten-key numeric input.
When the green light is on, if the

key is pressed along with keys on certain other segments of the

keyboard, then those keys will operate as numeric keys.
The [Enter] key functions differently depending on the application.
To disable, press the

NumLk

key once more (the indicator will turn off).

When the NumLk indicator is on: the following functions will operate:

ScrLk indicator (Scroll lock)

This indicator lights green when the

ScrLk

key are pressed: Scroll lock functions differently

depending on the application.

Hard disk drive indicator

Lighted: This indicator lights when the hard disk drive is accessed.

DVD-ROM & CD-R/RW drive indicator

Light off: Drive power is off.

Light on: Drive power is on, but the DVD-ROM & CD-R/RW drive is not accessed.

Blinking: Drive power is on, and the DVD-ROM & CDR/RW drive is being accessed.

How to switch the drive power on/off (

“Chapter 3: DVD-ROM & CD-R/RW Drive” in onscreen Refer-

ence Manual)

SD memory card indicator

Lighted: This indicator lights when the SD memory card or MultiMedia Card is accessed.

Содержание CF-W2 Series XP













































































Результаты поиска

Содержание CF-W2 Series XP

Отзывы:

Похожие инструкции для CF-W2 Series XP

Бренды по названию

Популярные бренды

Panasonic CF-W2 Series XP, Руководство по эксплуатации

Результаты поиска

Содержание CF-W2 Series XP

Отзывы:

Похожие инструкции для CF-W2 Series XP

Бренды по названию

Популярные бренды