manualshive.com logo in svg

Panasonic CF-71 Series, Справочное руководство

Поделиться
Скачать
Panasonic CF-71 Series Скачать руководство пользователя страница 37

37

CAUTION

Hard Disk Drive

To change your hard disk drive, contact Panasonic Technical Support

4

To customers:

To change your hard disk, contact Panasonic Technical Support.
Be sure to back up all important data before the change.
If [Hard Disk Lock] is set to [Enable] in the Setup Utility, change this to [Disable]
before the change.

To technicians (at Panasonic Technical Support):

Be careful when replacing the hard disk.  The hard disk is extremely sensitive to
shock.  In addition, static electricity could later affect some internal components.

Installing/Removing the hard disk

(For technicians at Panasonic Technical Support)

Hard Disk

Pull the tab of hard disk according to the arrow, and slightly lift the
hard disk drive.

Removing/Installing the hard disk

1

Power off your computer 

(

 

 "Starting Up/Shutting Down")

Do not shut down using the suspend or hibernation mode.

2

Open the display

Slide the latch located at the front and lift open the display.

Latch

Cover

Open the cover.

3

Open the cover

Open Slot

Insert a thin, flat object, like a ruler into the open slot on the left side
of the computer to release a lock.

Tab

2

2

2

(To next page)

Содержание CF-71 Series























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды