33
1
Connect the external display to your computer
Do not shut down using the suspend or hibernation mode.
Power off your computer
(
"Starting Up/Shutting Down")
Turn on the external display, then turn on your computer
with the display opened
3
External Display Port
Using an External Display
You can select either an external display, LCD or simultaneous with
Fn
+
F3
.
In addition, you can set the display to use during start-up with the follow-
ing procedure.
For more detailed information, please refer to the operation manual
of the external display.
2
NOTE
1
Run the Setup Utility
(
page 39
)
2
Using and , select [Main]
3
Using and , select [Display] and press Enter
4
Using and , select the display to use and press
Enter
5
Press F10 , then select [Yes]
6
Select your external display
Set your external display for [Monitor] in [Start] - [Settings] - [Control
Panel] - [Display] - [Settings] - [Advanced Properties].
When a monitor that does not conform to the Plug & Play standards
is connected, select [Change] and make the monitor settings.
