manualshive.com logo in svg

Panasonic CF-71 Series, Справочное руководство

Поделиться
Скачать
Panasonic CF-71 Series Скачать руководство пользователя страница 17

17

CAUTION

 HDD Motor Timeout

: When the hard disk drive is not accessed for more than a

minute, the hard disk motor is turned off.

 ECO Mode Timeout

:

If there is no input from a key, the touch pad, or the mouse
for more than two minutes, the power to the LCD is cut and
the hard disk motor is turned off.  Even when an application
software is being installed, the computer may enter the ECO
mode.
(except when the power management is set to [Disable])

 Power Management settings

*

Enabled only when the battery itself is being used.

**

 is displayed by pressing    

Fn

    +    

F8

    to disable the power management function.

The key combination    

Fn

    +    

F8

    sometimes does not work (such as during HDD

access).  Operability can be checked by confirming that 

 or  

 is being displayed ).

When installed in a network environment.

Be sure to disable the suspend/hibernation timeout settings with the Setup Utility.
After resuming operation from the suspend or hibernation mode, the network
connection may be severed or the computer will not work properly.

When a device like a high-speed modem or ISDN terminal adapter is con-
nected to the serial port, etc.

There are times when high-speed communication is adversely affected if the

power management function is enabled.  Please confirm that 

 is displayed by

pressing

to disable the power management function.  After you have

finished using a communications device, you can enable the power management
function by pressing

Key operation and music playback.

When the power management function is running, you may feel that key or touch
pad (or mouse) operations are sluggish.  Furthermore, music may not be played
back correctly when entering the ECO mode during playback.

1 min

1 min

Never

2 min

2 min

Never

Enable

Disable

Disable

HDD Motor Timeout

ECO Mode Timeout

Power Conservation
(AC Adapter Connected)

Popup window display by

pressing   Fn   +   F8

Enable (Always) Enable(Battery)*

Disable

Power Management

Functions
automatically set

**

(Setting at the time of
purchase)

Fn

   +   

F8

Computing On The Road

When the power management setting is disabled in the Setup Utility,   

Fn

    +    

F8

does not work.

NOTE

Fn

   +   

F8

   .

Содержание CF-71 Series























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды