manualshive.com logo in svg

Panasonic CF-71 Series, Справочное руководство

Поделиться
Скачать
Panasonic CF-71 Series Скачать руководство пользователя страница 25

25

CAUTION

Using a Multimedia Pocket Device

Installing/Removing a Multimedia Pocket Device

 Removing the device

2

Press the MP release button firmly.  The device will eject slightly.

Remove the device by holding both sides of the device.

MP Release Button

Power off your computer 

(

 

 "Starting Up/Shutting Down")

Do not shut down using the suspend or hibernation mode.

1

Please handle the device as shown
(holding both sides).  Otherwise, the de-
vice may be damaged.  Also, do not ap-
ply excessive downward force on the
device.  The projections at the bottom of
a device become deformed.
Be sure the shape of the lock at the bot-
tom of a device does not become de-
formed.  Do not insert a device that has
become deformed into the multimedia
pocket.  The device may become impos-
sible to remove later.

 Installing the device

Gently insert the device into the multimedia pocket by pushing on
both corners until it clicks into place.

Turn your computer on

3

2

2

Lock

Projections

Insert the device with the
label side facing up.

CAUTION

Do not install the device upside-down.

The bottom of the drive may become disfigured.

NOTE

Whether the device is properly recognized or not can be confirmed
in [Main] of the Setup Utility.  If the device is not recognized, power
OFF the computer and reinstall the device.

You may use an included CD-ROM pack (CF-VCD711), an optional DVD-ROM drive
pack (CF-VDD711/CF-VDD712) or an optional Superdisk drive pack (CF-VFS712) by
removing your floppy disk drive from the multimedia pocket.

Содержание CF-71 Series























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды