7-35
7.2.12. Setting the Audio PCB and RF-IF
PCB and BT PCB
1. Connect the FFC(Audio) to the Connector. (CN901)
2. Fix the Audio PCB using the 3 Screws. <N41>
3. Fix the RF-BT Plate to the RF-IF PCB using the 4 Screws
<N19>.
4. Fix the BT PCB to the RF-BT Plate using the 2 Screws
<N19>.
5. Connect the FFC(BT) to the Connector. (CN2)
6. Connect the FFC(BT) to the Connector. (CN604)
7. Attach the Antenna Cable(blue) to the Clamper.
8. Fix the RF-IF PCB Ass'y using the 3 Screws. <N41>
9. Connect the FPC(HSDPA) to the Connector. (CN16,
CN600)
10. Connect the Antenna Cable(black) and Cable(green) to
the connector (JK601, Jk600) .
11. Attach the Cable Hold Sheet.
Note:
Tighten the Screws in the numbered order (No1 to No3).
Tighten the Screws in the numbered order (No1 to No6).
Tighten the Screws in the numbered order (No1 to No3).
Screws <N19> : XSB2+3FNL
Screws <N41> : XSB2+5FNL
<N41>:No.1
<N41>:No.2
<N41>:No.3
Audio PCB
Connector(CN901)
FFC(Audio)
<N19>:No.3
<N19>:No.4
<N19>:No.2
<N19>:No.5
<N19>:No.6
<N19>
:No.1
Antenna Cable(blue)
BT PCB
RF-BT Plate
Connector(CN2)
Clamper
Connector(CN604)
FFC(BT)
Connector(JK1)
RF-IF PCB
<N41>:No.2
<N41>:No.1
<N41>:No.3
Antenna Cable(black)
Antenna Cable(green)
RF-IF PCB
Cable Hold Sheet
Connector(CN16)
FPC(HSDPA)
Connector(CN600)
Connector(JK601)
Connector(JK600)
