Panasonic CF-19ADUAX M Series Скачать руководство пользователя страница 24

Страница: 24 / 100

7-2

7.1.2.

Preparation

Before disassembling, be sure to make the following prepara-
tions.

• Shut down Windows and turn off the power.
• Disconnect the AC adaptor.
• Remove the optional DIMM memory card and PCMCIA card

if they are connected.

• Remove other devices if they are connected.

Attention:

• Please execute writing BIOS ID when you exchange the

Main PCB.

• Parts (Sheet and rubber) etc. related various the Conductive

Cloth and Heat Spreader cannot be recycled. Use new parts.

7.1.3.

Removing the Battery Pack and
HDD Mounting Kit

1. Open the Battery Cover.
2. Remove the Battery Pack.
3. Open the HDD Cover.
4. Remove the HDD Pack.

5. Remove the HDD FPC Protect Sheet(1).
6. Remove the HDD Case Lower.
7. Remove the HDD Case TAB.
8. Remove the HDD Damper from the HDD Case Upper.
9. Remove the HDD FPC Protect Sheet(2).

10. Remove the FPC(HDD Heater) and Thermal Sheet.

11. Remove the Insulation Sheet(HDD Heater).

12. Remove the HDD FPC Unit and HDD CON Sheet from

the HDD.

Battery Pack

HDD Mounting Kit

HDD Damper

HDD CON Sheet

HDD Case Upper

FPC(HDD Heater)

Insulation Sheet(HDD Heater)

HDD

HDD Case Lower

HDD
Case TAB

HDD FPC Unit

HDD FPC
Protect Sheet(2)

HDD FPC
Protect Sheet(1)

Thermal Sheet

Содержание CF-19ADUAX M Series





































































































Результаты поиска

Содержание CF-19ADUAX M Series

Отзывы:

Бренды по названию

Популярные бренды

Panasonic CF-19ADUAX M Series, Руководство по обслуживанию

Результаты поиска

Содержание CF-19ADUAX M Series

Отзывы:

Бренды по названию

Популярные бренды