Panasonic BL-C10A - Network Camera - Pan Скачать руководство пользователя страница 78

Страница: 78 / 104

Operating Instructions

3.1.6

Resetting the Camera to Factory Default

All camera settings are reset to factory default directly after the Execute button is
clicked.

Click [Reset to Factory Default] on the Maintenance page.

Click [Execute].

•

The indicator blinks orange, and then turns off for 10 seconds.

•

All camera settings (user name, password, IP address, subnet mask etc.)
are reset to factory default.

•

If the camera is reset to factory default, the network connection mode
changes to [Automatic Setup]. Reconfigure the camera seeing the Getting
Started.

Notes

•

The internal clock will not be reset, but the time format will return to AM/
PM mode (see page 35). Set it again.

•

See page 82—page 87 for default settings.

•

Pressing the FACTORY DEFAULT RESET button resets the camera to
the factory default (see page 81).

•

All buffered images are deleted when resetting the camera to factory
default.

•

The reset operation takes about 1 minute.

•

Do not turn off the camera during the reset operation.

Содержание BL-C10A - Network Camera - Pan









































































































Результаты поиска

Содержание BL-C10A - Network Camera - Pan

Отзывы:

Похожие инструкции для BL-C10A - Network Camera - Pan

Бренды по названию

Популярные бренды

Panasonic BL-C10A - Network Camera - Pan, Руководство по эксплуатации

Результаты поиска

Содержание BL-C10A - Network Camera - Pan

Отзывы:

Похожие инструкции для BL-C10A - Network Camera - Pan

Бренды по названию

Популярные бренды