3
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Parts and their functions . . . . . . . . . . . . . . . . . . . . . . . . .4
Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Main unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Turning on the power . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Setting the travel range (limiters) of the pan-tilt head . .20
Setting the video signals . . . . . . . . . . . . . . . . . . . . . . . .21
Video signal cable compensation . . . . . . . . . . . . . . . . .22
Genlock adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Total pedestal adjustment . . . . . . . . . . . . . . . . . . . . . . .28
White balance adjustment . . . . . . . . . . . . . . . . . . . . . . .29
Black balance adjustment . . . . . . . . . . . . . . . . . . . . . . .30
Tracing memory settings . . . . . . . . . . . . . . . . . . . . . . . .31
Preset memory settings . . . . . . . . . . . . . . . . . . . . . . . . .35
Setting menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Installing additional video boards . . . . . . . . . . . . . . . . .41
Inserting an optional card . . . . . . . . . . . . . . . . . . . . . . .41
Attaching the rack mounting adapters . . . . . . . . . . . . .42
Replacement of consumable parts . . . . . . . . . . . . . . . .42
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Accessories
Connecting cable (10m) . . . . . . . . . . . . . . . . . . . . . . . . . .1
Intercom jack (M6 jack) . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Plug (Mini DIN 6-pin) for inter-communications
system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Rack mounting adapters (5U) . . . . . . . . . . . . . . . . . . . . .4
Mounting screws (M4
a
8 mm) . . . . . . . . . . . . . . . . . . . . .8
O
Use the dedicated AC adapter (AW-PS505) for the power supply.
O
Use the AC adapter (AJ-B75) to install additional three or more AW-PB605 video boards.
Pan-tilt heads supported
AW-PH300, AW-PH300A, AW-PH350, AW-PH500,
AW-PH600
<Note>
The camera function cannot be controlled when the
AW-PH500 is used.
Introduction
O
This multi-function controller is used to control one or
more pan-tilt head systems (each of which consists of a
pan-tilt head and convertible camera) and at the same
time provide video signal cable compensation.
It consists of a main unit which processes the signals and
a control panel for operating the pan-tilt head system or
systems, and these two parts are connected by the
connecting cable (10 m) supplied.
O
Up to three control panels can be connected to the main
unit.
The cable supplied with the control panel and a 10BaseT
straight cable (UTP category 5) are used for the
connection.
A headset for inter-communication purposes can be
connected to the control panel to enable communication
between the control panels.
O
Up to five pan-tilt head systems can be connected to the
main unit, and composite systems or component systems
can be supported.
However, when a component system is to be supported,
the AW-PB302 RGB card (optional accessory) must be
installed in the convertible camera.
O
When the AW-PH350 is used as the pan-tilt head, the
connection between the main unit and pan-tilt head
system can be extended up to 1,000 meters.
When any other pan-tilt head model is used, it can be
extended up to 800 meters.
Содержание AWRP605P - MULTI FUNCTION CONTROLLER
Страница 45: ......
