![background image](http://html.mh-extra.com/html/panasonic/aw-ue70/aw-ue70_operating-instructions-manual_277298085.webp)
85
Web screen configurations
(continued)
Control pad and its buttons
To adjust the image in the horizontal or
vertical direction (panning or tilting), left-
click the pad and the buttons.
The more the outside of the pad is
clicked, the faster the camera operates.
Adjustment is also possible by dragging
the mouse.
Right-click the pad to initiate zooming and
focusing.
When the top half of the pad is clicked
in the up or down direction, the zoom
(magnification) is adjusted in the Tele
direction; conversely, when the bottom half
of the pad is clicked, the zoom is adjusted
in the Wide direction.
When the left half of the pad is clicked
in the left or right direction, the focus is
adjusted in the Near direction; conversely
when the right half of the pad is clicked,
the focus is adjusted in the Far direction.
The zooming can also be adjusted by
operating the mouse wheel.
●
When the mouse is used for dragging and dropping
from the control pad area to a position outside this
area, the panning, tilting and other operations will
not stop.
In a case like this, click the control pad area to stop
these operations.
Note
Speed
Use this to select the speed at which the
pan, tilt, zoom and focus operations are to be
performed.
Speed With Zoom POS.
“Off” or “On” is set here for the function used to adjust the
pan-tilt adjustment speed in conjunction with the zoom
magnification.
Setting value:
Off
The panning and tilting operations will not become
slower in the zoom status.
On
The panning and tilting operations will become slower
in the zoom status.
Factory settings:
On
This function has no effect during preset operations.
Focus ADJ With PTZ.
“Off” or “On” is set here for the function which
compensates for out-of-focusing when it occurs during
panning, tilting or zooming operations.
Factory settings:
Off
When “Off” is set, adjust the focus as required after
zooming or set the focus to the auto mode.
This item can be selected only when “Manual” has been
selected as the “Focus Mode” setting.
z
Preset Setting
Preset Speed Table
Set the preset speed table (Slow, Fast).
During preset playback, preset actions are performed at
Preset Speed (1 to 30) values that are based on the table
set here.
Setting value:
Slow
Set the preset speed table to “Slow”.
Fast
Set the preset speed table to “Fast”.
Factory settings:
Fast
Preset Speed
There are 30 preset pan-tilt operation speeds when
regenerating the camera direction and other information
which are registered in the preset memory.
Setting range:
1 to 30
Factory settings:
10
●
If a high value is selected for the Preset Speed
setting, the image on the screen may shake when
operation stops.
Note
Preset Scope
Selected here are the setting items to be recalled when
the contents of the preset memory are regenerated.
Setting value:
Mode A
Pan, Tilt, Zoom (including digital zoom), Focus, Iris,
Gain, white balance adjustment value
Mode B
Pan, Tilt, Zoom (including digital zoom), Focus, Iris
Mode C
Pan, Tilt, Zoom (including digital zoom), Focus
Factory settings:
Mode A
z
Limitation Setting
This establishes the up, down, left and right limit settings
of the pan-tilt head.
First, move the pan-tilt head to the desired limit position
using the control pad and its buttons.
When the position is determined, select the desired “Set
”
setting from the list of settings below to set the position.
(Select “Release
”
to release the setting.)
Tilt Up
Use this to save the current position as the
upward limit.
Tilt Down
Use this to save the current position as the
downward limit.
Pan Left
Use this to save the current position as the
leftward limit.
Pan Right
Use this to save the current position as the
rightward limit.
When “Set” or “Release” is selected, the tally lamp of the
unit blinks.
When a limiter is set, it blinks once; when a limiter is
released, it blinks twice.
Содержание AW-UE70
Страница 143: ...143 Memo ...
Страница 144: ...Web Site http www panasonic com Panasonic Corporation 2015 ...