![background image](http://html.mh-extra.com/html/panasonic/aw-ue70/aw-ue70_operating-instructions-manual_277298074.webp)
74
Web screen configurations
(continued)
Unicast port(Image)
Enter the unicast port number (used when sending
images from the unit).
Usable port number range:
1024 to 50000
●
Only even numbers can be specified.
●
The port number cannot be set to 10670.
Factory settings:
H.264(1): 32004
H.264(2): 32014
H.264(3): 32024
H.264(4): 32034
Unicast port(Audio)
Usable port number range:
1024 to 50000
●
Only even numbers can be specified.
●
The port number cannot be set to 10670.
Factory settings:
H.264(1): 33004
H.264(2): 33014
H.264(3): 33024
H.264(4): 33034
●
The unicast port number must be configured
when [Transmission type] is set to [Unicast port
(MANUAL)].
Note
Multicast address
Enter the multicast IP address.
Images and audio will be sent to the specified IP address.
Usable values:
IPv4: 224.0.0.0 to 239.255.255.255
IPv6: Multicast address starting with FF.
Factory settings:
H.264(1): 239.192.0.20
H.264(2): 239.192.0.21
H.264(3): 239.192.0.22
H.264(4): 239.192.0.23
●
Verify usable multicast IP addresses before entering
this setting.
Note
Multicast port
Enter the multicast port number (used when sending
images from the unit).
Usable port number range:
1024 to 50000
●
Only even numbers can be specified.
●
The port number cannot be set to 10670.
Factory settings:
37004
●
When sending audio from the unit, a port number
with “1000” added to the multicast port number will
be used.
Note
Multicast TTL/HOPLimit
Enter the TTL/HOPLimit value for multicast.
Usable values:
1 to 254
Factory settings:
16
●
When transmitting H.264 images via the Internet,
transmitted images may not appear depending on
proxy server settings, firewall settings, etc. In such
cases, consult your network administrator.
●
When displaying multicast images on a personal
computer with multiple LAN cards installed, disable
the LAN cards that are not used for reception.
Notes
●
IP control can be performed but if you do not want
to perform IP image transmission, set “JPEG
transmission”, “H.264 transmission” and “Audio
Transmission” to “Off”.
In this case, IP images will also not be displayed on the
mobile terminal.
Note
Содержание AW-UE70
Страница 143: ...143 Memo ...
Страница 144: ...Web Site http www panasonic com Panasonic Corporation 2015 ...