Installation Instructions
7.
Attach the cable cover.
• Fit the two protrusions on the cable cover into the guides on either side of the camera main unit rear panel.
• Using the two screws (M3) supplied with the cable cover, secure the cable cover to the camera main unit.
• Attach the mount bracket securely with the prescribed tool using the clamping torque below.
• Be absolutely sure to verify that none of the screws are loose.
Screw
diameter
Clamping torque
M3
0.78 N · m {8 k
g
f · cm}
Protrusion
Guide
Cable cover
Screw (M3)
<NOTE>
• Be sure to tighten to the specified torque.
• Check that the unit has been mounted securely with no tilting.
16
17
Stand-alone installation (when the mount bracket is going to be used) (continued)
Содержание AW-UE100KP
Страница 63: ...MEMO 63 ...
Страница 64: ...Web Site https www panasonic com Panasonic Corporation 2020 ...