Operating Instructions
10.
RS-422 connector <RS-422>
This RS‑422 connector (RJ‑45) is connected when exercising serial
control over the unit from an external device. Use a cable with the
following specifications for the connection to this connector.
Furthermore, by shorting the R‑TALLY signal (2‑pin) with the GND
(1‑pin), it is possible to light the tally lamp (red) in the camera head
section of the unit.
<NOTE>
• Do not connect PoE cable to the RS‑422 port.
• Do not apply a voltage to the R_TALLY_IN signal pin.
• Menu settings enable the output to pin 7 and pin 8 of the red tally
and green tally signals received by the unit. Output is by contact
output, and normally is “OPEN”, then it becomes “MAKE” for output.
(Operating Instructions (PDF) → “Camera menu items” → “Output
5/5 screen” → “External Output”)
LAN cable
*
1
(category 5e or above, straight cable),
max. 1000 m (3280 ft)
*
1
Use of an STP (shielded twisted pair) cable is recommended.
Pin
No.
Signal
Pin
No.
Signal
1
GND
5
TXD+
2
R_TALLY_IN
6
RXD+
3
RXD–
7
OPTION_OUT1
4
TXD–
8
OPTION_OUT2
Example OPTION_OUT1, OPTION_OUT2 connector
connections
AW-UE100
OPTION_OUT1
OPTION_OUT2
GND
Voltage: Maximum DC12 V
Current: Maximum 100 mA
11.
G/L IN connector <G/L IN>
This is the external sync signal input connector.
This unit supports BBS (Black Burst Sync) and tri‑level
synchronization.
Supply to this connector the signals that correspond to the video
signal format which has been set.
Frequency: 59.94 Hz, 29.97 Hz
Format
External sync signal input format
Tri-level sync
BBS
2160/59.94p
1080/59.94p
1080/59.94i
480/59.94i
2160/29.97p
1080/29.97p
1080/29.97PsF
1080/59.94p
1080/59.94p
1080/59.94i
―
1080/29.97p
1080/29.97p
1080/29.97PsF
1080/29.97PsF
1080/29.97p
1080/29.97PsF
1080/23.98p
over 59.94i
―
720/59.94p
720/59.94p
Frequency: 50 Hz, 25 Hz
Format
External sync signal input format
Tri-level sync
BBS
2160/50p
1080/50p
1080/50i
576/50i
2160/25p
1080/25p
1080/25PsF
1080/50p
1080/50p
1080/50i
―
1080/25p
1080/25p
1080/25PsF
1080/25PsF
1080/25p
1080/25PsF
720/50p
720/50p
Frequency: 24 Hz
Format
External sync signal input format
Tri-level sync
2160/24p
1080/24p
1080/24PsF
1080/24p
Frequency: 23.98 Hz
Format
External sync signal input format
Tri-level sync
2160/23.98p
1080/23.98p
1080/23.98PsF
1080/23.98p
1080/23.98PsF
12.
AUDIO IN connector <AUDIO IN>
Inputs external audio (microphone, line).
13.
LAN connector for IP control <LAN LINK/ACT>
This LAN connector (RJ‑45) is connected when exercising IP control
over the unit from an external device. Use a LAN cable (category 5e
or above, max STP 100 m (328 ft)) for connection.
36
Parts and their functions (continued)
Содержание AW-UE100KP
Страница 63: ...MEMO 63 ...
Страница 64: ...Web Site https www panasonic com Panasonic Corporation 2020 ...