26
O I
CONTROL IN IP/RP
Examples of connections
4. When connecting a pan-tilt head through a network and controlling the camera
and pan-tilt head using a personal computer
Personal computer
(Windows)
Pan-tilt head cable:
AW-CA50F29
Printed circuit board
switches:
WEB settings
AC adapter:
AW-PS300
HUB
O
Use the camera/pan-tilt head connecting cable (AW-CA50F29) to connect the pan-tilt
head with the convertible camera in which a WEB card (AW-PB309), etc. has been
installed.
O
Set the printed circuit board switches to the WEB settings.
O
Use a 10BaseT straight cable (UTP category 5) to connect the personal computer
(Windows) and convertible camera via a hub.
O
Install browser software (Netscape or Internet Explorer) in the personal computer
(Windows).
O
Use the browser software to input the IP address which was set on the WEB card,
and check that the pan-tilt head and camera can be controlled using the personal
computer.
10BaseT straight cable:
UTP category 5, max. 328 feet (100 meters)
10BaseT straight cable:
UTP category 5, max. 328 feet (100 meters)
Cable with a nominal cross
section of 1.25 mm
2
or more
max. 98.4 feet (30 meters)
