Panasonic AW?HE60SE, Руководство по эксплуатации

Страница: 37 / 118

37
Basic operations
(continued)
p w
Control exercised from the Multi Hybrid Control Panel AW‑RP555
This is used to switch between the
Day mode and Night mode.
For switching the SCENE file
(FullAuto, Manual1 to 3).
For operating the camera menus.
MENU: This operates in the same
way as MENU on the
camera.
ITEM: This operates in the same
way as ENTER on the
camera.
YES: This operates in the same
way as UP on the camera.
NO: This operates in the same
way as DOWN on the
camera.
For selecting the cameras to be
operated.
For switching the contrast
mode. *3
Each time the [(AF)EXT] button
is pressed, the focus setting is
switched between auto focus and
manual focus.
When auto focus is selected, the
[(AF)EXT] button lights.
When the focus setting is
switched between auto focusing
and manual focusing by the
camera, the resulting status (lamp
on or off) will not be reflected in
the button.
Each time the [MODE] button is
pressed, the setting is switched
between CAM and BAR.
The [MODE] button lights up at the
BAR setting.
Each time the [GAIN] button is
pressed, the setting is switched in
the sequence of GAIN AUTO 
0dB  L (9dB)  H (18dB), and the
mode is displayed by the LEDs as
shown below.
[ON: LED lights; OFF: LED off]
GAIN
button
MANU L
LED
MANU H
LED
AUTO ON OFF OFF
0dB OFF OFF OFF
LOW
OFF ON OFF
HIGH OFF OFF ON
Others OFF ON ON
Shutter mode selection
Each time this button is pressed, one of the shutter
modes set by the controller or “shutter OFF” is
selected.
The [SHUTTER] button lights up in all modes except
shutter OFF.
The shutter mode settings established by the
[PRESET] buttons are as follows.
MODE
PRESET
No.
MODE
PRESET
No.
1/100**
1
1/120** 2
PRESET1
1/4000 PRESET6
1/10000 PRESET7
1/250 PRESET2
SYNCHRO-
SCAN
PRESET8
1/500 PRESET3
1/1000 PRESET4 ELC PRESET9
1/2000 PRESET5 OFF PRESET10
**1: “1/100” when 59.94 Hz is selected as the frequency setting
of the AW-HE60.
**2: “1/120” when 50 Hz is selected as the frequency setting of
the AW-HE60.
For switching WHITE BAL A,
B or ATW. *4
For executing AWB. *1, *2
The unit does not have
an ABC function.
*1: The lamp of the AWC switch flashes while automatic
white balance is being executed.
When AWB is completed successfully, the lamp
goes off; when it is not completed successfully, it
lights up.
*2: The switch lights without AWB being executed when
the white balance mode of the main unit is ATW, or
when the Color Bar is being displayed.
*3: The contrast level can be adjusted in the AUTO
mode.
*4: There is a delay in the switching of the display when
the settings are changed on the camera.