Panasonic AW-HE40HWP, Руководство по эксплуатации

Страница: 45 / 64

45
Operating Instructions
Network settings
[When using Windows]
■
Installing the software
Be absolutely sure to read through the “Readme.txt” on the
CD-ROM supplied with the unit first before attempting to
install the software.
Software provided on the CD-ROM
●
Easy IP Setup Software (EasyIpSetup.exe)
This software establishes the unit’s network settings.
For details, refer to the sections that follow.
■
Use the Easy IP Setup Software
to establish the unit’s settings
The settings related to the unit’s network can be established
using the Easy IP Setup Software supplied.
To establish the settings for a multiple number of units, the
settings must be selected for each camera involved.
If the settings cannot be established using the Easy IP Setup
Software, select the settings separately for the unit and
personal computer on the network page of the setting menu.
For further details, refer to the “Operating Instructions —
<Operations and Settings>” (PDF file).
●
If, after the network settings have been established,
another device in the same network has the same IP
address, the network operations will not be performed
properly.
Set the IP address in such a way that it does not
duplicate an existing IP address.
●
Do not establish network settings from a multiple
number of Easy IP Setup Software programs at the
same time for a single camera.
Similarly, do not perform the “Auto IP setting” operation
of the remote camera controller (AW-RP50 or
AW-RP120) at the same time.
The IP address settings may no longer be recognized
as a result.
●
When you start the Easy IP Setup Software, you may
be asked for the administrator account password.
●
The Easy IP Setup Software is designed in such a way
that when around 20 or more minutes have passed
after the power was turned on, the MAC address and
IP address of the target camera will no longer be
displayed.
It does this to improve the security.
 When “20min” is selected for the enable time
among the “Easy IP Setup accommodate period”.
(page 80 in the <Operations and Settings>)
●
The Easy IP Setup Software cannot be used from a
different subnet via a router.
Notes