![background image](http://html1.mh-extra.com/html/panasonic/aw-he40hwp/aw-he40hwp_operating-instructions-manual_3676495011.webp)
11
Installation Instructions
How to install and connect the unit
(continued)
6
Connect the rear panel connectors.
Anchor the AC adaptor cable in place using the cable clamp.
Cable clamp
Strap part
LAN cable
LAN cable
LAN cable
(for RS-422)
LAN cable
(for RS-422)
RS-232C cable
RS-232C cable
HDMI cable
SDI cable
AC adaptor cable
AC adaptor cable
[AW-HE40H]
[AW-HE40S]
●
How to secure the AC
adaptor cable
Loosely secure the cable
clamp.
Fasten the cable clamp.
Loosely secure the cable clamp in
the area shown above.
Take hold of the strap part, slide
the cable clamp until it stops
moving, and then secure it tightly.
●
Always disconnect the power supply before connecting or disconnecting cables.
Connecting or disconnecting cables while the power is turned on may result in malfunctions.
Note
The unit is in the standby condition when the AC adaptor is connected.
The primary circuit is always “live” as long as the AC adaptor is connected to an electrical outlet.
Содержание AW-HE40HWP
Страница 62: ...62 Memo ...
Страница 63: ...63 Memo ...