46
Basic menu operations
When the camera is to be controlled from the AW-CB400/AW-RP400 controller
The EXT command is allocated to the [OPTION SW] button to switch between Auto Focus and Manual Focus.
Each time the [EXT] button is pressed, the focus mode switches between Auto Focus and Manual Focus.
The following functions allocated to the [OPTION SW] are not available: DEF, WIP, HEATER/FAN, LAMP, OPTION, ND
Do not use the OPTION function
of the AW-CB400 to operate the
ZOOM/FOCUS, use the ZOOM lever or
FOCUS dial of the AW-RP400 instead.
The following settings of the LCD menu do
not function: TILT RANGE, MEMORY LENGTH
The TRACING MEMORY
function is not available.
The R/B PED dial is
not available.
The camera menu operation becomes available when the CAMERA
MENU CNT item is set to ENABLE in the LCD menu of the AW-CB400.
[OPTION SW]
[A]: Opens the menu and also scrolls up the item list.
[B]: Scrolls down the item list.
[C]: Confirms the item selection and also changes a set value in the
positive direction.
[D]: Changes a set value in the negative direction.
1
Press one of the [1] to [5] buttons of [CONTROL SELECT] to select the unit which is to be
operated.
2
Press the [A] button of [OPTION SW] for two seconds.
The main menu is displayed on the monitor.
3
Press the [A] or [B] button of [OPTION SW] to make the item to be selected blink.
Press the [A] button of the [OPTION SW] to scroll up the item list.
Press the [B] button of the [OPTION SW] to scroll down the item list.
