Panasonic AVC ULTRA AJ-UPX36OED, Руководство по эксплуатации

Страница: 55 / 210

– 55 –
Chapter 3 Preparation — Adjusting and setting the viewfinder
Adjusting and setting the viewfinder
This camera is equipped with a 0.39-inch organic EL viewfinder. Use either the viewfinder or the LCD monitor depending on your purpose and the
shooting conditions.
Using the viewfinder
When the LCD monitor is difficult to use because the surroundings are bright, you can check the image using the viewfinder.
Positioning your eye near the viewfinder will trigger the eye sensor to automatically display the image.
f The sensitivity of the eye sensor is set in the [VIDEO OUT/LCD/VF] menu → [VF] → [EYE SENSOR] → [HIGH] or [LOW].
f The eye sensor may not work properly depending on the shape of the eyeglasses you may be wearing, how you hold the camera, or by strong light
present in the vicinity of the eyepiece. If this happens, switch the image display by assigning [VF ON/OFF] to the USER button.
Diopter adjustment lever
Eye sensor
1
Move the viewfinder in the vertical direction to adjust the screen to a comfortable angle.
The viewfinder can be lifted vertically to approximately 90 degrees.
2
Adjust the characters on the viewfinder screen so that they are clearly visible using the diopter adjustment lever.
@ @
NOTE
t The image brightness and color hue seen on the viewfinder and LCD monitor may be different from that seen on a TV monitor. The final check of the
image should be done on a TV monitor.
Adjusting the viewfinder
r Adjusting the brightness, contrast, and color level
Adjust [BRIGHTNESS] (brightness), [CONTRAST] (contrast), and [COLOR LEVEL] (color level) in the [VIDEO OUT/LCD/VF] menu → [VF].
The adjustments for the viewfinder do not affect the images output or recorded by the camera.
r Switching between color and monochrome
The viewfinder screen can toggle between a color display and monochrome display. Set the display with the [VIDEO OUT/LCD/VF] menu → [VF] → [VF
COLOR].