Panasonic AV-HS410N Скачать руководство пользователя страница 42

Страница: 42 / 144

1. Basic operations

Adjusting the Wash waveforms

On the Color Background menu, use [F1] to display the
CBGD1 Wave sub menu (or CBGD2 Wave sub menu).

Use [F2] to select the gradation waveforms using the
Pattern item.

Sine

Sine waves are selected.

Saw

Sawtooth waves are selected.

Use [F3] to select the gradation cycle using the Cycle
item.

Use [F4] to select the gradation phase using the Phase
item.

Use [F5] to select the gradation angle using the Angle
item.

Setting the Wash movements

On the Color Background menu, use [F1] to display the
CBGD1 Move sub menu (or CBGD2 Move sub menu).

Use [F2] to set the gradation movement using the Move
item.

Off

No movement is set.

Roll

The gradations are scrolled.

Rotation

The gradations are rotated.

Use [F3] to set the movement speed using the Speed
item.

Содержание AV-HS410N

















































































































































Результаты поиска

Содержание AV-HS410N

Отзывы:

Panasonic AV-HS410N, Руководство по эксплуатации, Страница: 42 / 144

Результаты поиска

Содержание AV-HS410N

Отзывы: