Panasonic AK-UC3000, Руководство по эксплуатации

Страница: 68 / 109

– 68 –
Chapter 4 Menu Operations — Menu list
Item Description of settings
[FILE NAME] Enters a file name. (15 characters or less)
f
Factory setting: [USER1]
[EXECUTE] Selects whether to execute with the configured settings.
[NO], [YES]
[CAC FILE]
[CAC FILE] cannot be selected right after the power is turned on, because boot of the camera is in progress.
This is not an error. Perform operation after a while.
Item Description of settings
[CARD FILE SELECT] Selects a file.
[1]…[100]
f
Factory setting: [1]
[READ] Loads CAC files.
[YES], [NO]
[DELETE] Deletes the CAC file in the SD memory card.
[NO], [YES]
[MAINTENANCE]
[CAC ADJUST]
[CAC ADJUST] cannot be selected right after the power is turned on, because boot of the camera is in progress.
This is not an error. Perform operation after a while.
Item Description of settings
[CAC CONTROL] Selects whether to perform maintenance of CAC files stored in the camera’s internal memory.
[OFF], [ON]
f
Factory setting: [ON]
[CAC FILE DELETE] Selects a file to delete.
[YES], [NO]
[CAC FILE NUMBER] Selects a file.
[1]…[32]
f
Factory setting: [1]
[LENS FILE ADJUST]
Item Description of settings
[LENS FILE ADJUST] [LENS FILE SW] Switches the enable/disable of the lens file.
[OFF], [ON]
f
Factory setting: [OFF]
[LENS FILE MODE] Selects the operation mode.
[LOAD], [STORE], [CANCEL]
f
Factory setting: [LOAD]
[FILE NO.] Selects a file.
When [LENS FILE MODE] is [LOAD]:
[1]…[32]
When [LENS FILE MODE] is [STORE]:
[1]…[32]
f
Factory setting: [1]
[FILE NAME] Enters a file name. (15 characters or less)
f
Factory setting: [LENS FILE 1]
[EXECUTE] Selects whether to execute.
[NO], [YES]
[FLARE R] Adjusts Rch flare of the data selected in [FILE NO.].
[ − 100]…[ + 100]
f
Factory setting: [0]
[FLARE G] Adjusts Gch flare of the data selected in [FILE NO.].
[
−
100]…[
+
100]
f
Factory setting: [0]
[FLARE B] Adjusts Bch flare of the data selected in [FILE NO.].
[ − 100]…[ + 100]
f
Factory setting: [0]
[GAIN R] Adjusts Rch gain of the data selected in [FILE NO.].
[
−
100]…[
+
100]
f
Factory setting: [0]
[GAIN B] Adjusts Bch gain of the data selected in [FILE NO.].
[ − 100]…[ + 100]
f
Factory setting: [0]
[W H SAW R] Adjusts Rch white shading for the data selected in [FILE NO.] horizontally using a saw-toothed waveform.
[ − 100]…[ + 100]
f
Factory setting: [0]