Panasonic AK-UC3000, Руководство по эксплуатации

Страница: 19 / 109

– 19 –
Chapter 2 Description of Parts — Left side
Left side
2
14
1
4
7
8
5
3
6
9
15
16
17
18
10 11 12 13
1 <LOCAL> lamp
While this lamp is lit, the <ND> filter and <CC> filter can be adjusted manually.
2 <FILTER LOCAL> switch
This switch sets whether to adjust the <ND> filter and <CC> filter manually or remotely.
3 <CC> filter dial
This dial selects the filter to suit the color temperature of the subject.
<A><3200K>: Sets the color temperature to 3200 K.
<B><4300K>: Sets the color temperature to 4300 K.
<C><6300K>: Sets the color temperature to 6300 K.
<D><CROSS>: Sets the cross filter.
<E><DF0>: Sets the diffusion filter.
@ @ NOTE
t
Do not turn the <CC> filter dial when the <LOCAL> lamp is off.
4 <ND> filter dial
This dial selects the filter to suit the brightness of the subject.
<1><CAP>: Shuts out light from entering the MOS sensor.
<2><CLEAR>: Does not use the ND filter.
<3><1/4ND>: Reduces the amount of light entering the MOS sensor to 1/4.
<4><1/16ND>: Reduces the amount of light entering the MOS sensor to 1/16.
<5><1/64ND>: Reduces the amount of light entering the MOS sensor to 1/64.
@ @ NOTE
t
Do not turn the <ND> filter dial when the <LOCAL> lamp is off.
5 < > mark
Indicates the focal plane of the MOS sensor.
Use this mark as a reference to accurately measure the focal distance from the subject.
6 <GAIN> switch
Switches the gain for the camera image. (<L>, <M>, <H>)
The gain can be configured with the CCU.
This switch cannot be used when the CCU or ROP is connected to the camera.
7 <DISP/MODE CHK> switch
This is a spring switch which can be used to check the shooting status etc.
f
Push this switch towards <OFF> to hide all displays except for the operation status display of the viewfinder, frame display such as an area,
marker, and safety zone.
f
Push this switch towards <CHK> to display in the viewfinder the setting status for shooting functions, and the list of functions assigned to the
<USER 1>/<USER 2>/<USER 3>/<USER 4> buttons, etc. Pushing the switch towards <CHK> again while information is being displayed switches
the display to the next information page. The mode check information display disappears after approximately three seconds.
8 <MENU> button
Press this button to display the camera’s [MAIN MENU] screen.
Press the button again to return to the original image.
9 <USER 2> button
A user-selected function can be assigned to this button. Pressing the button performs the assigned function.
10 Busy (active status indicator) lamp
Indicates the active status of the SD memory card and lights up when the card is active.