background image

9

Introduction

„

„

Overview

This camera control unit (CCU) is designed to be used with the 

AK-HC3800 studio handy camera (sold separately).

Connect it to the studio handy camera (hereinafter referred to as the 

camera) with an optical fiber multi cable (sold separately).

When the unit’s power is turned on, power is supplied to the camera. 

(This setting can be changed.)

You can use the unit to input and output the video signals of various 

formats.

The unit supports HD/SD-SDI outputs, SD analog composite outputs, 

HD/SD-SDI return inputs, VBS return inputs, and prompter inputs.

Intercom calls with the camera and microphone audio output are 

possible.

The unit also comes with tally and other system interface inputs.

Connecting the AK-HRP200 ROP (sold separately) with a multi cable 

(sold separately) allows you to use the ROP to control the adjustment 

and setting of the camera and this unit.

„

„

Computer requirements

Use a host computer that satisfies the following conditions.

CPU

Intel

®

 Core

TM

2 DUO 2.4 GHz or faster, or a CPU with 

equivalent specs.

Supported 

operating systems

Microsoft

®

 Windows

®

 7 Professional SP1 32-bit

Microsoft

®

 Windows

®

 7 Professional SP1 64-bit

z

z

Use is not possible in Windows

®

 XP compatibility 

mode.

Memory

32-bit: 1 GB or more
64-bit: 2 GB or more

Web browser

Microsoft

®

 Internet Explorer

®

 8

z

z

Use is not possible with the 64-bit version of 

Internet Explorer

®

 8.

Important

If you use a computer that does not satisfy the requirements, 

problems may occur, such as screens being slow to render and 

the Web browser becoming inoperable.

„

„

Disclaimer of warranty

IN NO EVENT SHALL Panasonic Corporation BE LIABLE TO ANY 

PARTY OR ANY PERSON, EXCEPT FOR REPLACEMENT OR 

REASONABLE MAINTENANCE OF THE PRODUCT, FOR THE 

CASES, INCLUDING BUT NOT LIMITED TO BELOW:

1

  ANY DAMAGE AND LOSS, INCLUDING WITHOUT LIMITATION, 

DIRECT OR INDIRECT, SPECIAL, CONSEQUENTIAL OR 

EXEMPLARY, ARISING OUT OF OR RELATING TO THE 

PRODUCT;

2

  PERSONAL INJURY OR ANY DAMAGE CAUSED BY 

INAPPROPRIATE USE OR NEGLIGENT OPERATION OF THE 

USER;

3

  UNAUTHORIZED DISASSEMBLE, REPAIR OR MODIFICATION 

OF THE PRODUCT BY THE USER;

4

  INCONVENIENCE OR ANY LOSS ARISING WHEN IMAGES 

ARE NOT DISPLAYED, DUE TO ANY REASON OR CAUSE 

INCLUDING ANY FAILURE OR PROBLEM OF THE PRODUCT;

5

  ANY PROBLEM, CONSEQUENTIAL INCONVENIENCE, 

OR LOSS OR DAMAGE, ARISING OUT OF THE SYSTEM 

COMBINED BY THE DEVICES OF THIRD PARTY;

6

  ANY INCONVENIENCE, DAMAGES OR LOSSES RESULTING 

FROM ACCIDENTS CAUSED BY AN INADEQUATE 

INSTALLATION METHOD OR ANY FACTORS OTHER THAN A 

DEFECT IN THE PRODUCT ITSELF;

7

  LOSS OF REGISTERED DATA CAUSED BY ANY FAILURE;

8

  ANY DAMAGE OR CLAIMS DUE TO LOSS OR LEAKAGE OF 

IMAGE DATA OR SETTING DATA SAVED ON THIS UNIT OR ON 

A MEMORY CARD OR COMPUTER.

„

„

Network security

This unit also has functions which are used when it is connected to a 

network.

Using the unit when it is connected to a network may possibly give rise 

to the following.

1

  Leakage or disclosure of information transmitted via this unit

2

  Unauthorized use of this unit by a third person with malicious intent

3

  Interference or stoppage of this unit by a third person with 

malicious intent

It is your responsibility to take sufficient network security measures such 

as those described below to protect yourself against the above risks.

z

z

If this unit is used in a system with a computer connected, make 

sure that checks for and removal of computer viruses and malicious 

programs are implemented regularly.

z

z

When connecting this unit and a computer, use a crossover cable to 

connect them on a one-to-one basis connection.

Also observe the following points.

z

z

Do not install the unit in a location where the unit, cables, and other 

parts may be easily damaged.

„

„

Memory cards

Memory cards used with the unit should conform to SD or SDHC 

standards.

Be sure to use the unit to format memory cards.

Memory cards with the following capacity can be used with the unit.

SD

8 MB to 2 GB

SDHC

4 GB to 32 GB

SDXC memory cards are not supported.

For the latest information not described in the Operating Instructions, 

refer to the following website.

http://pro-av.panasonic.net/

Observe the following points when using and storing this 

unit.

z

z

Avoid high temperature and humidity.

z

z

Avoid water droplets.

z

z

Avoid static electricity.

„

„

Upgrade software

You can obtain upgrade software from Service and Support on the 

following website.

http://pro-av.panasonic.net/

For the upgrade procedure, refer to the instructions included with the 

download file.

Содержание AK-HCU200P





















Отзывы: