12
Connections
System configuration
Camera:
AK-HC3800
Optical fiber multi cable
(sold separately)
Camera control unit (CCU):
AK-HCU200
ROP cable
(sold separately)
ROP:
AK-HRP200
Equipment connections
z
z
Before proceeding with the connections, check that the power of the
unit and camera is OFF.
z
z
Use the optical fiber multi cable to connect the unit and camera.
Connect only the AK-HC3800 camera: Do not connect any other
model.
z
z
Use a dedicated cable to connect the unit to the ROP.
z
z
When the unit’s power switch is set to ON and then the camera’s
power is set to ON, the camera can be controlled using the ROP.
z
z
The camera statuses are shown on the picture monitor.
Refer to “Picture monitor (PM) displays” of <Operations and
Settings>.
When you configure the unit’s settings by menu operations, the menu
screens are displayed on the picture monitor.
Refer to “Menu operations” of <Operations and Settings>.
z
z
When you configure the unit’s settings by Web settings from a
computer, use a crossover cable (10Base-T or 100Base-TX) to
connect the computer directly to the unit.
Refer to “Web settings” of <Operations and Settings>.
z
z
Before disconnecting the cables from the camera and ROP, turn off
the camera’s power and then turn off the unit’s power.
HD/SD SDI OUT
PROMPT
HD/SD-SDI RET
Camera:
AK-HC3800
Picture monitor
(HD/SD-SDI)
Computer
Picture monitor
(Analog SD)
ROP:
AK-HRP200
