background image

3

WARNING:

Always keep memory cards or accessories out of the 

reach of babies and small children.

CAUTION

RISK OF ELECTRIC SHOCK

 DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, 

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, 

within an equilateral triangle, is intended to 

alert the user to the presence of uninsulated 

“dangerous voltage” within the product’s 

enclosure that may be of sufficient magnitude 

to constitute a risk of electric shock to 

persons.
The exclamation point within an equilateral 

triangle is intended to alert the user to 

the presence of important operating and 

maintenance (servicing) instructions in the 

literature accompanying the appliance.

WARNING:

•  To reduce the risk of fire or electric shock, do not 

expose this equipment to rain or moisture.

•  To reduce the risk of fire or electric shock, keep this 

equipment away from all liquids. Use and store only 

in locations which are not exposed to the risk of 

dripping or splashing liquids, and do not place any 

liquid containers on top of the equipment.

CAUTION:

To reduce the risk of fire or electric shock and 

annoying interference, use the recommended 

accessories only.

CAUTION:

In order to maintain adequate ventilation, do not install 

or place this unit in a bookcase, built-in cabinet or any 

other confined space. To prevent risk of electric shock 

or fire hazard due to overheating, ensure that curtains 

and any other materials do not obstruct the ventilation.

CAUTION:

The mains plug of the power supply cord shall remain 

readily operable.

The AC receptacle (mains socket outlet) shall be 

installed near the equipment and shall be easily 

accessible. To completely disconnect this equipment 

from the AC mains, disconnect the power cord plug 

from the AC receptacle.

 indicates safety information.

WARNING:

This equipment must be grounded.

To ensure safe operation, the three-pin plug must 

be inserted only into a standard three-pin power 

outlet which is effectively grounded through normal 

household wiring.

Extension cords used with the equipment must 

have three cores and be correctly wired to provide 

connection to the ground. Wrongly wired extension 

cords are a major cause of fatalities.

The fact that the equipment operates satisfactorily 

does not imply that the power outlet is grounded or 

that the installation is completely safe. For your safety, 

if you are in any doubt about the effective grounding of 

the power outlet, please consult a qualified electrician.

CAUTION:

This apparatus can be operated at a voltage in the 

range of 100 – 240 V AC.

Voltages other than 120 V are not intended for U.S.A. 

and Canada.

Operation at a voltage other than 120 V AC may 

require the use of a different AC plug. Please contact 

either a local or foreign Panasonic authorized service 

center for assistance in selecting an alternate AC plug.

CAUTION:

Invisible Laser radiation is emitted from the Optical 

fiber connector when this product is turned on.

Don’t look into directly into the Optical fiber connector 

of this product.

CAUTION:

This product uses a semiconductor laser system and 

is a laser class 1 product complies with Radiation 

Performance Standards, 21CFR SUBCHAPTER J.

Use of controls or adjustments or performance of 

procedures other than those specified herein may 

result in hazardous radiation exposure.

Don’t make any modifications.

Don’t repair by yourself.

Refer servicing to qualified personnel.

CAUTION:

•  Keep the temperature inside the rack to between  

0 °C to 40 °C (32 °F to 104 °F).

•  Bolt the rack securely to the floor so that it will not 

topple over when the unit is drawn out.

Read this first!

(For AK-HCU200P, AK-HCU200PS)

Содержание AK-HCU200P





















Отзывы: