background image

4

Contents

Introduction  . . . . . . . . . . . . . . . . . . . . . . . 5

Features  . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Parts and their functions  . . . . . . . . . . . . . 7

Front panel  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Rear panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Tapes  . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Inserting the tape  . . . . . . . . . . . . . . . . . . . . . . . . .14
Usable tapes  . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Operation  . . . . . . . . . . . . . . . . . . . . . . . . .15

Turning on the unit’s power . . . . . . . . . . . . . . . . . 15
STOP mode  . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Recording  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Pause/recording (follow-on recording)  . . . . . . . . 16
Playback  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Cue/review  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Still image playback  . . . . . . . . . . . . . . . . . . . . . . 17
Linear 0.3

k

playback  . . . . . . . . . . . . . . . . . . . . . 18

Variable speed playback  . . . . . . . . . . . . . . . . . . . 18
Repeat playback  . . . . . . . . . . . . . . . . . . . . . . . . . 19

Time code & user’s bit  . . . . . . . . . . . . . .20

Time code  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
User’s bit  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Setting the time code (from the menu)  . . . . . . . . 20
Setting the time code (from the front panel)  . . . . 20
Setting the user’s bit  . . . . . . . . . . . . . . . . . . . . . . 21
Playing back the time code and user’s bit . . . . . . 21

Superimposed screen displays  . . . . . . 22

Setup (initial settings) . . . . . . . . . . . . . . .24

Setting method using the on-screen menus  . . . . 24
Returning to the factory settings  . . . . . . . . . . . . . 24
Setting the user defaults  . . . . . . . . . . . . . . . . . . . 25
Loading the user defaults  . . . . . . . . . . . . . . . . . . 26
Menu protection  . . . . . . . . . . . . . . . . . . . . . . . . . 26
Releasing the menu protection mode  . . . . . . . . . 27
Displaying the DIAG menu  . . . . . . . . . . . . . . . . . 27

Setup menus  . . . . . . . . . . . . . . . . . . . . . .28

Menus which are displayed . . . . . . . . . . . . . . . . . 28
SYSTEM  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
BASIC  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
OPERATION  . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
INTERFACE  . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
TAPE PROTECT . . . . . . . . . . . . . . . . . . . . . . . . . 40
TIME CODE  . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
VIDEO  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
MENU  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
DIF  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Error messages  . . . . . . . . . . . . . . . . . . . .50

Condensation  . . . . . . . . . . . . . . . . . . . . .52

Emergency eject . . . . . . . . . . . . . . . . . . . 53

Video head cleaning  . . . . . . . . . . . . . . . .53

Maintenance . . . . . . . . . . . . . . . . . . . . . . .53

Specifications  . . . . . . . . . . . . . . . . . . . . .54

Содержание AJHD1200A - DVCPRO HD VTR

























































Отзывы: