71
Error messages (continued)
“WARNING” information display
• A warning message is displayed whenever a warning occurs.
When warnings have not been detected, “NO WARNING” is displayed.
• When multiple warning occur, the descriptions for each warning can be checked by turning the search dial.
If “T&S&M” is selected in the setup menu No. 008 (DISPLAY SEL), a message appears in the mode display whenever a
warning or error occurs.
When multiple events occur, the event with the highest priority is displayed.
Monitor display
Description
Priority
high
low
Counter
display
Deck
operation
BUSY
Displayed while the clip information is being read or when the clip
configuration has changed.
No operations can be performed while this display is on the screen.
[Meaning]
• A card has been inserted or removed.
• Updating is now underway.
• Processing is now underway after recording.
• Other
BUSY
operation
continues
CANNOT REC
Displayed when data cannot be recorded on the P2 card.
[Meaning]
• An attempt has been made to record data when the card is write-
protected.
• An attempt has been made to record data when the card has no
more free memory space on it.
• An attempt has been made to record on a card that cannot be
used.
• The card status has changed during recording.
CANT
REC
stop
CANNOT PLAY
Displayed when play has been stopped by clip trouble or other
factors.
[Meaning]
• An attempt has been made to play clips when there are no clips
present.
• An attempt has been made to initiate play for a card that cannot be
used.
• Play is not acknowledged or it has been stopped for some other
reason.
CANT
PLAY
stop
INT SG
Displayed for the first two seconds when the REC button is pressed
and the E-E mode is established while SG, SG1 or SG2 has been
selected using the INPUT SELECT VIDEO button or while SG has
been selected using the INPUT SELECT AUDIO button.
INT SG
operation
continues
NO INPUT
Displayed for the first two seconds when the REC button is pressed
and the E-E mode is established while no input signals except for
analog audio signals are being supplied to the connector selected
using the INPUT SELECT button.
NO
INPUT
operation
continues
MARK ON /
MARK OFF
Displayed for two seconds when a shot mark has been added or
deleted.
MARK ON/
MARK OFF
operation
continues
Warning messages