Panasonic AJ-SPC700E, Руководство по эксплуатации

Страница: 82 / 124

82
Chapter 6 Manuipulating Clips with Thumbnails
(continued)
6-7-3 Deleting Voice Memos
1
Perform Steps
1
to
4
in the [6-7-1 Playing Back Voice
Memos] section to select the voice memo in the clip.
2
Move the pointer over the clip you want to delete, and
press the MENU BAR button. The pointer moves to the
menu bar.
3
From the menu bar, select OPERATION DELETE.
YES and NO appear to confirm deletion. Use the cursor
buttons and the SET button to select YES.
The voice memo is deleted.
6-8 Deleting Clips
1
Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.
2
Use the cursor buttons to move the pointer over the clip
you want to delete.
Press the SET button to select the clip.
3
Press the MENU BAR button and select OPERATION
DELETE from the menu bar.
4
The following screen appears. Use the cursor buttons
and the SET button to select YES.
5
The clip is deleted. All selected clips (in blue-green
frames) are deleted by this operation.
<Note>
Pressing the SET button stops the deletion operation in the
middle.
6-9 Restoring Clips
Restores clips that are defective as a result of sudden
powering-down during recording, or removal of the P2 card
being accessed.
<Note>
Only those clips with yellow corrupt clip markers can be
restored. Delete the clips with red corrupt clip markers. If the
clip cannot be deleted, format the P2 card.
During restoration of the clips, however, the defective-clip
indicator may change from yellow to red, resulting in inability
to restore the clips.
1
Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.
2
Use the cursor buttons to move the pointer over the clip
you want to restore (defective clips are indicated by
corrupt clip marks).
Press the SET button to select the clip.
3
Press the MENU BAR button, and select OPERATION
REPAIR CLIP from the menu bar.
4
The confirmation window appears. Use the cursor
buttons and the SET button to select YES.
6-10 Reconnection of Incomplete
Clips
Incomplete clips may be generated when clips recorded on
multiple P2 cards (connected clips) are separately copied to
different cards. Reconnection function generates one clip
(the original, connected clip) from incomplete clips.
1
Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.
2
Use the cursor and SET button to select incomplete
clips to reconnect.
Usually, thumbnails of incomplete clips (clips with
marker) are displayed in line.
3
Press the MENU BAR button and select OPERATION
RE-CONNECTION from the menu bar.
4
The confirmation window appears. Use the cursor
buttons and SET button to select YES.
<Note>
indication stays illuminated until all the incomplete clips
that comprise the original clip are reconnected.
#,52%''PINKUJDQQMࡍ࡯ࠫ㧞㧜㧜㧡ᐕ㧤᦬㧝㧢ᣣޓἫᦐᣣޓඦᓟ㧞ᤨ㧡㧥ಽ