12
Chapter 2 Parts and their Functions
(continued)
2-2 Audio (input) Function Section
MIC IN (microphone input) jack (XLR, 3-pin)
A microphone (optional accessory) is connected here.
Power for the microphone comes from this jack.
A remote microphone may be connected. In this case,
the power supply to the appropriate connector must be
enabled through menu option FRONT MIC POWER or
REAR MIC POWER.
These options are found in the <MIC/AUDIO2> screen
on the MAIN OPERATION page.
AUDIO LEVEL CH1/CH2 (audio channel 1 & 2
recording level adjustment) controls
With the
AUDIO SELECT CH1/CH2 switch
positioned to [MAN], these controls can be used to
adjust the recording levels for Audio Channels 1/2.
Note that the controls are designed to be locked. For
adjustment, each control must be depressed while
turning.
AUDIO SELECT CH1/CH2 (audio channel 1 & 2
automatic/manual level adjustment selector)
switch
Use this switch to select recording level control mode for
Audio Channels 1 and 2.
AUTO:
Recording level automatically controlled.
MAN:
Recording level manually controlled.
AUDIO IN (audio input selector) switch
Use this switch to select the signals recorded through
Audio Channels 1 and 2.
FRONT:
Signal from the microphone connected to the
MIC IN jack is recorded.
W.L. (WIRELESS):
Signal from the slot-in wireless receiver is
recorded.
REAR:
Signal from the audio device connected to the
AUDIO IN CH1/CH2 connector is
recorded.
AUDIO IN CH1/CH2 (audio input channel 1 & 2)
connectors (XLR, 3-pin)
Audio devices or a microphone may be connected here.
LINE/MIC/+48V (line input/mic input/mic input
+48V) selector switch
Used to select the audio signal input from the
AUDIO
IN CH1/CH2 connectors.
LINE:
Audio signal line-input from the audio device is
input.
MIC:
Audio signal from a self-powered (active)
microphone is input. (The main unit does not
supply power to the remote microphone).
+ 48V:
Audio signal from a passive microphone is input.
(The unit supplies power to the remote
microphone).
Wireless slot
A Unislot wireless receiver (optional accessory) may be
attached here.
FRONT AUDIO LEVEL (audio recording level
adjustment) control
This control adjusts the recording levels for Audio
Channels 1 and 2. Level adjustment does not depend
on the position of the AUDIO SELECT switch.
The control can be enabled or disabled through the
menu options FRONT VR CH1 or FRONT VR CH2.
These options can be found in the <MIC/AUDIO1>
screen on the MAIN OPERATION page.
#,52%''PINKUJDQQMࡍࠫ㧞㧜㧜㧡ᐕ㧤㧝㧢ᣣޓἫᦐᣣޓඦᓟ㧞ᤨ㧡㧥ಽ
Содержание AJ-SPC700E
Страница 123: ...123 MEMO ...