Panasonic AJ-RC5, Руководство по эксплуатации

Страница: 8 / 48

E-7
Parts and Their Functions
U
MON SEL selector switch
This switch is used to select the signals
which are output from PIX OUT or WFM
OUT on the base station.
V
IRIS RANGE switch
This switch’s setting takes effect when the
IRIS switch
M has been set to MANUAL.
When the IRIS RANGE switch is not at
the FULL position, the iris can be coarsely
adjusted by the RANGE control
X and
finely adjusted by the iris control joystick
Y . In addition, the joystick’s operation
range can be varied using the
SENSITIVITY control
W . When the IRIS
RANGE switch is set to FULL, the
SENSITIVITY control
W and the RANGE
control X do not operate, and the iris is
controlled using the iris control joystick Y .
W
SENSITIVITY control
This is used to control the operation range of the iris control joystick Y when the IRIS RANGE
switch
V
is at OFF.
X
RANGE control
This is operational when the IRIS RANGE V switch is not set to FULL. It is used to coarsely
adjust the iris.
Y
Iris control joystick
When the IRIS switch M is at AUTO, the position set by the joystick is incremented or
decremented to the AUTO IRIS LEVEL setting on the SETUP menu.
When the IRIS switch
M is at MANUAL, the joystick is used to adjust the iris.
<Note>
Set the MANUAL/AUTO selector switch on the lens to AUTO.
Z
M.PED control
This is used to set the master pedestal level.
Y
Z
U
V
X
W
MON SEL
SUP
B
G
R
SEQ
ENC
IRIS
IRIS RANGE
SENSITIVITY
RANGE
Remote Control Operation Panel AJ-
FULL
PED
PREVIEW
(PUSH)