Panasonic AJ-RC5, Руководство по эксплуатации

Страница: 7 / 48

E-6
ENGLISH
Parts and Their Functions
J
CALL button
This button is used to call the camera.
When the camera is called, the button’s
LED comes on.
K
R TALLY indicator
This indicates the R TALLY signal which
is input from the TALLY IN connector of
the base station.
L
G TALLY indicator
This indicates the G TALLY signal which
is input from the TALLY IN connector of
the base station.
CALL TALLY
IRIS
MANUAL
GAIN
MON SEL
FILTER GAMMA EXTENDER
CHECK
AUTO
J
L
M
R
N
K
O
P
Q
S
T
N
AUTO IRIS indicator
This comes on when the IRIS switch M is set to AUTO.
M
IRIS switch
This is the iris selector switch. Either AUTO or MANUAL is selected.
GAIN indicator
This comes on when the GAIN value appears on the numerical display LED.
S
O
EXTENDER indicator
This comes on when the extender (
a
2) of the camera lens is used.
P
CHECK button
By pressing this button in succession, the GAIN indicator S
>
FILTER indicator R
>
GAMMA indicator T come on in this order, and the GAIN value, FILTER position and master
GAMMA value are displayed respectively on the numerical display LED.
Q
Numerical display LED
This indicates the f-value of the lens. When the GAIN, FILTER or GAMMA setting is changed,
it displays the corresponding value. When the CHECK button
P is pressed in succession, the
f-value, GAIN value, FILTER position, master GAMMA value and f-value are displayed
respectively.
<Note>
“ - - - ” appears on the LED when the power to the camera main unit is off or when the base
station front panel operations are effective (refer to the AJ-BS900H Operating Instructions).
R
FILTER indicator
This comes on when the FILTER position appears on the numerical display LED.
T
GAMMA indicator
This comes on when the master GAMMA value appears on the numerical display LED.