128
Manipulating Clips with Thumbnails : Properties
3
Press the SET button.
The input window (soft keyboard) for modifying meta-
data is displayed. Use the keyboard to modify the meta-
data.
The keyboard operation is the same as
[Checking and
modifying read metadata
] (page 122).
4
Press OK on the keyboard to write the modified meta-
data on the clip and return to the metadata window.
The input window (soft keyboard) for modifying meta-
data is displayed. Use the keyboard to modify the meta-
data.
Note
z
Deleting only the respective items of LOCATION (record-
ing location data) in SHOOT is not possible. By setting
ALTITUDE to empty, other LONGITUDE/LATITUDE items
are collectively deleted.
z
The metadata for a clip with the
incomplete clip indica-
tor cannot be modified. For the clips recorded on multiple
P2 cards, modify the metadata while all P2 cards are
inserted.
z
Any MEMO with 100 characters or more cannot be modi-
fied.
Select PROPERTY
>
CARD STATUS from the thumbnail
menu to set the desired indication mode (remaining free
space or used memory capacity) for the P2 card status
display.
1
Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.
2
Press the MENU button and select PROPERTY
→
PROPERTY SETUP
→
P2 CARD CAP from the
thumbnail menu.
The following screen appears. Select the P2 card
status display settings from the P2 CARD CAP menu
option.
REMAIN:
Show remaining free space on the P2 card as the P2
card status display. (Factory setting)
USED:
Show used memory capacity on the P2 card as the
P2 card status display.
P2 Card Status Display
P2 Card Status Display Settings
AJ-HPX2000P(VQT1D27-5)E.book 128 ページ ２００９年１１月１２日 木曜日 午後８時１４分
