Panasonic AJ-FX216, Руководство по эксплуатации

Страница: 6 / 30

-3-
2. Alarm LED (ALARM)
This LED flashes while the alarm signal is received.
It lights in the following cases:
• When the ALARM/REMOTE connector receives
the alarm reset signal.
• When the alarm reset time specified for AUTO
RESET in MENU 1 OF 3 has elapsed (in multi-
screen mode).
To turn off the LED, press the ALARM RESET but-
ton.
3. Sequence/Alarm Reset Button
(SEQUENCE/ALARM RESET)
This button activates sequence mode when the
MODE SELECT/CAMERA SELECT switch is in
CAMERA SELECT position.
In alarm condition, this button serves as ALARM
RESET button regardless of the MODE
SELECT/CAMERA SELECT switch position.
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
CAMERA
IN
CAMERA
OUT
PLAY IN MONITOR OUT
ALARM/REMOTE
CAMERA
SW IN
SIGNAL
GND
16 15 14
13
12 11 10 9
8
6
5 4 3
2
1
7
16 15 14
13
12 11 10 9 8
6
5 4 3
2
1 7
POWER
ON
OFF
ZOOM ALARM
CAMERA
SELECT
MODE
SELECT
MENU
CAMERA/VTR
SET STILL ON
Digital Video MultiplexerWJ-FS
216
SEQENCE
ALARMRESET
MULTI SCREEN
QUAD SHIFT
Panasonic
1 2 3 4
9 10
11
12 13
5 6
14
7 8
15 16
REC OUT
• Sequence Button
This button is used to activate the sequence mode.
In this mode, a series of pictures is displayed in
succession on the monitor screen in the order and
for the duration or dwell time you set.
• Alarm Reset Button
This button is used to cancel an active alarm.
Press while the alarm function is activated to reset
the alarm and the unit to the condition before the
alarm function was activated.
4. Zoom/Multiscreen/Quad Shift Button (ZOOM/
MULTISCREEN/QUAD SHIFT)
This button has three functions. The functions
change according to the position of the MODE
SELECT/CAMERA SELECT switch as follows:
When the MODE SELECT/CAMERA SELECT switch
is in CAMERA SELECT position, this button works
as the MULTISCREEN or the QUAD SHIFT button.
When the MODE SELECT/CAMERA SELECT switch
is in MODE SELECT position, this button works as
the ZOOM button.
• MULTISCREEN button
Pressing this button changes the picture (cam-
era picture or playback picture from the time
lapse VTR) to four (quad), 3x3 or 4x4 (multi)
pictures.
• QUAD SHIFT button
Pressing this button when monitoring a quad
picture shifts to another of up to four quad pic-
tures. See page 17 for details.
• ZOOM button
Pressing this button zooms up a specified por-
tion of the monitored picture.
See page 19 or 21 for details.
1. Power ON/OFF Switch (POWER ON/OFF)
This switch is used to turn the power of this unit on
or off. The POWER indicator lights when the power
of this unit is on.
Switch Protector (Standard Accessory)
To prevent that the power of the video multi-
plexer is turned off accidentally, install the sup-
plied switch protector as shown below.
SWITCH
PROTECTOR