-2-
PREFACE
IMPORTANT NOTICES
PRECAUTIONS
The WJ-FS216 Video Multiplexer is designed to pick up
the field signals from video cameras and record the
camera images on a time lapse VTR. The pictures of
up to 16 cameras can be monitored in single, quad or
multi picture mode. Camera/pictures can be called
from the time lapse VTR output by a title added to the
camera picture or by simply pressing the selection but-
ton for the respective camera.
FEATURES
The WJ-FS216 Video Multiplexer is designed to pick up
the field signals from video cameras and record the
camera images on a time lapse VTR. Up to 16 cameras
(black & white or colour cameras) can be connected to
the WJ-FS216 regardless of whether the camera signals
are synchronized or not.
The functions of the two available modes, MULTIPLEX
and MULTISCR, are as follows:
• MULTIPLEX mode
1. Monitoring sequential or single (spot) pictures and
simultaneously recording them on the time lapse
VTR.
2. Easy selection of playback picture from the time
lapse VTR and displaying it as a single (spot) or
multi picture (quad, 3x3, or 4x4) by simply pushing
the camera selection button.
The Quad Shift function allows you to shift between
up to four quad pictures (each consisting of 4 pic-
tures).
3. Pauses can be inserted in the pictures reproduced
by the time lapse VTR (STILL ON mode). In multi
picture mode, pauses can also be inserted in any
monitored pictures, and single spot pictures can be
zoomed up to twofold.
• MULTISCR mode
1. You can monitor sequential, single (spot) or multi
pictures (quad, 3x3, or 4x4).
In multi picture mode, all camera pictures are dis-
played on the multiscreen skipping some frames.
2. You can switch between display patterns (spot,
quad, 3x3, or 4x4) by simply pressing any of the
camera selection buttons 1 to 3.
3. The Quad Shift function allows you to display up to
four quad pictures (each consisting of 4 pictures)
on one screen.
4. You can pause (STILL ON mode) or zoom the play-
back picture. In multi picture mode, all pictures
monitored can be paused, but only one specified
picture can be zoomed.
• Common to both modes
1. Remote control
2. An alarm beeps to indicate that a cable is discon-
nected.
3. Memory backup (approx. 72 hours) for menus.
• While playing back the picture of the time lapse
VTR with linear mode, the picture of another chan-
nel may be reproduced and break in. In this case,
play back again in normal mode or time lapse
mode.
• This unit does not accept the camera motion detec-
tor alarm signal.
• Do not attempt to disassemble the unit. In order to
prevent electrical shock, do not remove screws or
covers. There are no user-serviceable parts inside.
• Do not abuse the unit. Avoid striking, shaking etc. It
could be damaged by improper handling or stor-
age.
• Do not use strong or abrasive detergents when
cleaning the unit body.
• Do not expose the unit to water or moisture, and do
not operate it in wet or humid areas.
• Do not use the unit in an extreme environment
where high temperature or high humidity exists.
• Handle the unit with care.
• Take immediate action if ever the unit does become
wet. Tune the power off and refer servicing to quali-
fied service personnel. Moisture can damage the
unit and also create a danger of electric shock.
• Use the unit under conditions where temperature is
within
−
10°C to +50°C (14°F to 122°F), and humidity
is below 90%. When installing the unit in the rack, it
is recommended to install the fan.
• The input power source is 220 - 240 V AC, 50 Hz.
• Refer all installation work to qualified service per-
sonnel or system installers.
Содержание AJ-FX216
Страница 3: ......
