46
REC
EJECT
REC REVIEW
REC
PAUSE/
STILL
MENU
TIME MODE
SET
ON SCREEN
SHIFT
/REW
PLAY
FF/
REV PLAY
TRACKING
V. LOCK
TIMER SEARCH COUNTER LOCK CNT RESET
RESET/
CANCEL
STOP
REV ADV
FWD ADV
AG-
HDR
POWER
POWER
7 PLAYBACK AND SPECIAL-EFFECTS PLAYBACK
[STOP] button
Playback mode indicator
[POWER] indicator
[PLAY] button
[TIME MODE+/–] button
1
Press the [POWER] button to turn the operating mode
on.
The [POWER] indicator lights.
2
Press the [TIME MODE +/–] button to set the play mode
to 2H (SP) or 6H (EP) mode.
The [2H] or [6H] indication is shown on the display.
• To play back a tape recorded in the timelapse mode
at slow speed, press the [TIME MODE +/–] button
to set the desired mode (24H, 48H..... 960H) (slow
play).
• Avoid using slow-motion playback continuously for
long periods (more than several hours).
3
Load the recorded cassette correctly.
* If a cassette is loaded when the operating mode is off,
the operating mode is switched on automatically (auto
operate on function).
If the cassette’s safety tab has been removed, the
operating mode is turned on and play starts
automatically (auto play function).
4
Press the [PLAY] button to start play.
The play indicator is shown on the display and
the Play mode is engaged.
When a tape recorded in the HDR mode is played back,
the [HDR] indicator lights.
* No sound is output in the Timelapse Play mode.
When the play mode is set to 2H (SP) or 6H (EP),
playback operates as follows.
• Cassettes recorded in the 2H or ordinary (SP)
Timelapse modes are played back in the 2H (SP)
mode. [2H] is shown on the display.
• Cassettes recorded in the 6H or HDR Timelapse
mode are played back in the 6H (EP) mode. [6H] is
shown on the display
To stop playback
5
Press the [STOP] button.
The tape stops and the Stop mode is engaged.
7-1 Preparation
7-2 Playback
Connection
Connect the output connectors on the rear panel correctly.
Menu switch setting
Set the menu switches in <VIDEO/VTR MODE> as
required.
5
[DETAIL] ... Factory setting: OFF
Set to “ON” to improve reproduction of picture detail.
However, the S/N ratio will be degraded.
5
[QUASI-V] ... Factory setting: OFF
Set to “ON” to add V. pulse in the normal play (2H or
6H) mode.
5
[MEMORY STOP] ... Factory setting: ON
Counter memory ON/OFF.
• Set to “ON” to use the counter memory function.
5
[AUTO REW] ... Factory setting: OFF
Automatic rewind ON/OFF.
• Set to “ON” to rewind the tape to the beginning when
the tape ends.
5
[REPEAT PLAY] ... Factory setting: OFF
Repeat playback ON/OFF.
• Set to “ON” to execute repeat playback.
* Noise may appear in the picture with tapes not
recorded on the AG-TL950P.
Notes on playback
Tapes recorded on this VCR cannot be played back on
standard VHS VCRs. Use this VCR, an S-VHS VCR or a
VCR with SQPB function to play back tapes recorded on
this unit. Also be aware that not all S-VHS VCRs will be
able to play back tapes recorded on this unit, because
some use different S-VHS/VHS detection methods.
Try to avoid operations such as shuttle search or field
advance playback as much as possible. These put a
comparatively high stress load on the tape and can lead
to picture degradation over time.
During shuttle search or field advance playback, noise may
appear. This is normal with this unit and is not a malfunction.
[POWER] button
Содержание AG-TL950P
Страница 4: ...4 ...
