1
Chapter
Men
uOper
ations
Item
Setting
Notes
CLOCK SETTING
Sets the internal calendar (date)
For details, see [Setting Date and Time of Internal
Clock] (page 26).
TIME ZONE
Sets the time difference relative to Greenwich Mean
Time (GMT).
–12:00 ... 0:00 ... +13:00
For details, see [Setting Date and Time of Internal
Clock] (page 26).
• This setting cannot be initialized by
performing the MENU INIT option and
the INITIAL option in USER FILE.
GL PHASE
Selects the output signal whose phase is locked to
the signal input to the GENLOCK IN connector in HD
(1080i, 720P) mode. (For details, refer to page 69.)
HD SDI:
The HD SDI is locked to the genlock input.
COMPOSITE:
The down-converted composite signal
(VIDEO OUT or SDI OUT 576i (480i) signal) is locked
to the genlock input.
• Not available when SYSTEM MODE is
set to 576-50i (480-59.94i).
H PHASE
Adjusts the horizontal phase when phase is locked to
the signal input to the GENLOCK IN connector.
–512 ... 0 ... +511
• Hold down the JOG dial button and
turn it downwards or upwards and
maintain this position to quickly
change values.
MENU INIT
Restores all setting menu values including all scene
files (F1 to F6) and the user file to their factory
defaults.
• Not available when PC MODE SELECT
is set to USB DEVICE and PC MODE
is set to ON.
DIAGNOSTIC screen
Item
Setting
Notes
VERSION
Indicates the version of the firmware used in this
camera.
A subscreen provides details on which firmware
versions are used.
(Subscreen)
CAM SOFT: Camera microprocessor software
SYSCON SOFT: Software for system control
microprocessor
P2CS BL2-1: Boot program 1 for P2 control
microprocessor
P2CS BL2-2: Boot program 2 for P2 control
microprocessor
P2CS KR: P2 control microprocessor kernel
P2CS AP: P2 control microprocessor application
VUP: System software used for updating all camera
firmware
VUP FS: File system for updating the camera
DM FPGA: Main FPGA configuration ROM
MODEL NAME
Indicates the model name of this camera.
SERIAL NO.
Indicates serial number of this camera.
OPERATION
Indicates the time of the camera has been on.
____ indicates the factory setting