Panasonic AG-HMC80PJ Скачать руководство пользователя

Страница: 97 / 126

Chapter 3: Screen displays and setting menus

CHECK CARD.

Please check the card.
If you use an SD Memory Card that has been

used with other devices or personal computers,
for the first time with this unit, CHECK CARD
may be displayed and the unit cannot operate.

In this case, perform the following:

Remove the SD Memory Card from the unit

and reinsert it. (Page 30)
The CHECK CARD display may disappear if
the unit detects the card.

If CHECK CARD remains displayed even if

you remove and insert the card several times,
check the contents of the card and delete all
its data, using a personal computer.

Format the card with this unit. (Page 8)

If the data in the card is unreadable or cannot be

deleted with a personal computer, the card may
be damaged. Use another SD Memory Card.

CONTROL DATA ERROR

HAS BEEN DETECTED.

An error has been detected in the control

information.

D
DISCONNECT USB CABLE.

The camera cannot be operated while connected

via USB cable.

DISCONNECT USB CABLE.

When switching from one mode to another,

disconnect the USB connection cable.

I
INCOMPATIBLE CARD.

PLEASE CHECK CARD.

Recording may not be successful with this card.

Please check the card.

N
NO CARD

No card is inserted.

■

NOW ACCESSING.

PLEASE DO NOT REMOVE

CARD.

Card is currently being accessed. Please do not

remove the card.

R
REC STOPPED.

NOW WRITING.

Video recording has been stopped. Data is now

being written to the card.

REPAIR CLIP?

Do you wish to repair clips now?

S
SET DATE AND TIME

Set the date and time.

T
THE CLIP ARE PROTECTED.

PLEASE REMOVE THE PROTECTION.

The clip is protected. Please cancel the
protection.

THE RECORDING IS STOPPED

(OVER THE LIMITATION)

Recording will stop. (Continuous recording for 1

hours)

THIS BATTERY CANNOT

BE USED.

This battery cannot be used.

THIS CARD CANNOT

RECORD IN VIDEO MODE.

The card cannot be used for video recording.

THUMBNAIL DATA ERROR

IS DETECTED.

An error has been detected in the thumbnail

information.

U
UNABLE TO FORMAT.

The card cannot be formatted.

■

Содержание AG-HMC80PJ































































































































Результаты поиска

Содержание AG-HMC80PJ

Отзывы:

Похожие инструкции для AG-HMC80PJ

Бренды по названию

Популярные бренды

Panasonic AG-HMC80PJ, Руководство по эксплуатации

Результаты поиска

Содержание AG-HMC80PJ

Отзывы:

Похожие инструкции для AG-HMC80PJ

Бренды по названию

Популярные бренды