Panasonic AG-HMC80PJ Скачать руководство пользователя

Страница: 81 / 126

Chapter 2: Operations in DV mode

Thumbnail operations

Thumbnail operations in DV mode are composed
of the following.

THUMBNAIL

MODE
INDICATOR

OPERATION

DELETE
REPAIR CLIP

OTHER FUNCTIONS

CARD FORMAT
CARD STATUS
SYSTEM INFO

Operating the thumbnail menu

Press the MENU button in the thumbnail

screen.

The thumbnail menu is displayed.

To display the standard setting menu, press
and hold down the MENU button (approx. 3
seconds).

Using the up or down button of the cursor

button, select a menu item.

Press the right button of the cursor button or

the ENTER button.

Repeat this operation to display additional
items.

Press the left button of the cursor button to
return to the previous item.
Press the MENU button to close the
thumbnail menu.

Selecting the thumbnail display

method

You can change the thumbnail display method.

Press the MENU button in the thumbnail

screen.

The thumbnail menu is displayed.

Select the thumbnail menu THUMBNAIL item

(Page 114), and press the ENTER button.

•

Select the item you want to set, and press

the ENTER button.

MODE:

ALL:
Displays all the clips.
MARKER:
Displays only clips for which a shot mark has

been added.

INDICATOR:

ON:
Displays markers (shot marks, etc.) on the

thumbnails.

OFF:
Markers (shot marks, etc.) are not displayed

on the thumbnails.

Deleting clips

Clips that are deleted cannot be restored. Be

sure to check carefully before deleting them.

Deleting all clips

Press the MENU button in the thumbnail

screen.

The thumbnail menu is displayed.

Select the DELETE item (Page 114) for the

thumbnail menu OPERATION, and then

press the ENTER button.

Select ALL CLIPS and press the ENTER

button.

The confirmation screen is displayed.

Select YES and press the ENTER button.

The clip is deleted.

•

■

Содержание AG-HMC80PJ































































































































Результаты поиска

Содержание AG-HMC80PJ

Отзывы:

Похожие инструкции для AG-HMC80PJ

Бренды по названию

Популярные бренды

Panasonic AG-HMC80PJ, Руководство по эксплуатации

Результаты поиска

Содержание AG-HMC80PJ

Отзывы:

Похожие инструкции для AG-HMC80PJ

Бренды по названию

Популярные бренды